Select your vehicle

Baer Brakes SS4 Plus Dual Deep Stage Rear-Rear Ends W/Ford 9 Inch Small Bearing Housing Ends (5X4.5 Inch 5X4.75 Inch BC) Includes Dual (Two Sets) Of Calipers Clear 1.375 Inch Pistons – 4262683C

Baer Brakes

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • No vehicle fitment is listed; the kit is built for Ford 9 inch rear axles with small bearing housing ends and a 5.75 inch axle flange
  • Part number 4262683C: four S4 clear calipers with 1.375 inch pistons on 11 inch two-piece slotted, drilled rotors
  • Bolt pattern 5×4.50/5×4.75, 5 lug, for wheels 15 inch and larger
  • Sold as a set; front rotors, park brake, lug nuts and brake hoses are not included

Description

Overview

The Baer Brakes 4262683C is an SS4 Plus Dual Deep Stage rear brake kit for Ford 9 inch rear axles that use small bearing housing ends. It places four S4 fixed calipers, each with 1.375 inch pistons, on two 11 inch two-piece slotted and drilled rotors, so each rear wheel runs a dual caliper setup built for drag racing.

The SS4 Plus system is built for heavy, fast cars that may also see street use, and this version is scaled down for wheels 15 inch and larger. Fit depends on the axle flange style rather than model year, and the axle flange must measure 5.75 inch.

Key features

  • Four 4-piston S4 calipers in a clear powder coated finish.
  • Hard anodized aluminum pistons at 1.375 inch, with stainless steel abutments and noise suppression clips.
  • Two-piece 11 inch rotors that are slotted, drilled and zinc plated, with iron rotors and aluminum hats.
  • Billet aluminum hats drilled for 5/8 inch wheel studs.
  • Rotors pre-assembled with NAS high grade stainless hardware, and mounting hardware included.
  • Dust and weather seals, with a choice of DR1 or HB100 pad type.

Choosing a rear brake upgrade

A rear brake kit replaces the stock hardware at the axle, so it changes how the car stops under repeated hard use. Caliper count, piston size and rotor diameter all affect pedal feel and heat handling. A dual caliper setup spreads clamping force across two pads per wheel, which is why it appeals to racers who brake hard from high speed.

Before buying, measure the axle flange and confirm the bearing housing style, since these set the bolt pattern and hub fit. Brake lines, master cylinder capacity and proportioning valve settings often need review when calipers grow in number. Parking brake hardware and front rotors are separate parts and may need matching upgrades for balanced stopping.

After installation, inspect pads, rotor faces and hat bolts after the first few runs. Look for heat cracks, uneven wear, or a pedal that sinks over time, and bleed the system if soft pedal feel appears.

Specifications

Brand Baer Brakes
Part number 4262683C
UPC 844165038948
Sold as Set
Caliper S4, 4-piston, fixed, two-piece
Caliper color Clear
Caliper quantity 4
Piston diameter 1.375 inch
Piston material Hard anodized aluminum
Rotor outside diameter 11.0 inch
Rotor thickness 1.02
Rotor type 2-piece, vented
Rotor style Slotted, drilled, zinc plated
Rotor material Iron with aluminum hat
Hat Billet aluminum, drilled for 5/8 inch wheel studs
Lug count 5 lug
Wheel bolt pattern 5×4.50/5×4.75 (in)
Minimum wheel diameter 15.0 inch
Axle flange type Ford 9 inch small bearing
Axle flange requirement 5.75 inch
Pad FMSI number DR1
Friction material Semi-metallic
Grade type Performance
Template S125A
Park brake No
Country of origin US

Vehicle fitment

The 4262683C is built for the Ford 9 inch rear axle with small bearing housing ends, so compatibility depends on the axle housing and its flange rather than a model year.

Installation notes

The rotors are preassembled with stainless hardware and mounting hardware is included. Brake hoses are not part of the kit and must be sourced separately. Brake work on rear axles should be done by a qualified installer, who should bleed the hydraulic system before the car is driven.

What’s included

Four S4 calipers in two sets, two-piece slotted and drilled rotors with billet aluminum hats, NAS high grade stainless hardware on the rotors, and mounting hardware. Sold as a set.

Not included: Front rotors, park brake, lug nuts and brake hoses.

Specification

Shipping weight 48 lbs
Package dimensions 15 × 15 × 15 in
brands

Sold as

Set

Wheel bolt pattern (in)

5×4.50/5×4.75

Lug nuts

5 Lug

Rotor type

2-Piece

Rotor style

Slotted, Drilled

Rotor construction

2-Piece

Rotor material

Iron w/Aluminum Hat

Front rotor included

No

Park brake

No

Lug nuts included

No

Axle housing flange type

Small Bearing

Country of origin

US

Questions & Answers

What is the Baer Brakes part number 4262683C?

The Baer Brakes 4262683C is an SS4 Plus Dual Deep Stage rear brake kit for Ford 9 inch rear axles with small bearing housing ends. It includes four S4 calipers with 1.375 inch pistons and two 11 inch slotted, drilled, two-piece rotors, and is sold as a set.

Will the 4262683C fit my vehicle?

The 4262683C is built for Ford 9 inch rear axles with small bearing housing ends and needs a 5.75 inch axle flange. Confirm fit for your vehicle's year, model and trim before ordering.

Are front rotors or lug nuts included?

No. Front rotors, park brake, lug nuts and brake hoses are not included. The rear rotors come with stainless hardware preassembled, and mounting hardware is included with the kit.

What rotor size and wheel size does this kit use?

The rear rotors measure 11.0 inch outside diameter with a thickness of 1.02. The system fits most wheels 15 inch and larger, with a minimum wheel diameter of 15.0 inch and a 5x4.50/5x4.75 bolt pattern with 5 lug.

How do I know whether my axle housing takes a kit like this?

Check the axle housing style and the flange measurement before ordering. Bearing housing type and flange size set compatibility more than model year. Confirm fit for your vehicle's year, model and trim before ordering.

Should brake hoses be replaced when the kit is installed?

Often yes, because hoses must reach the new caliper ports and should be in sound condition. Inspect existing hoses for cracks, bulges or leaks. Replace any that show wear, and bleed the system afterward.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon