Overview
The Baer Brakes Pro Plus 4262186R is a red rear disc brake kit for Ford 9 Inch early big bearing rear axle housing ends with a 5×5.00 inch wheel bolt pattern. The kit pairs a six-piston fixed caliper with a two-piece 13.0 inch slotted, drilled and zinc-plated rotor.
The backing plate serves as the caliper mount and houses a one-piece park brake shoe assembly, so the parking brake hardware sits inside the rear package. The kit fits most wheels 17 inches or larger, but fit with every wheel style is not guaranteed, so compare the Q082H template against the chosen wheel before installation. The 6P caliper is manufactured in Phoenix, Az.
Key features
- Six-piston (6P) fixed rear caliper in a red powder-coated finish
- Two-piece 13.0 inch rotor with slotted, drilled and zinc-plated surface and billet aluminum hat
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons designed to reduce uneven pad wear
- Dual seals for dust, weather and pressure
- CNC machined from US-sourced forged or billet aluminum
- Backing plate houses a one-piece park brake shoe assembly
- Steel braided brake hoses with DOT approval.
Wheel clearance and rotor size
Rear disc conversions change more than the brake itself. A larger rotor and a caliper with more pistons alter the space between the rotor and the inner wheel face, so clearance has to be checked with the wheel and tire combination that will actually be run. Offset, backspacing and the inner barrel shape all affect whether the rotor and caliper sit without rubbing. Setting up with a template before the axle is torn down avoids rework.
Pad material and brake fluid are the next choices once the hardware is set. A street-oriented pad suits daily driving, while a more aggressive compound may be better on trail runs with heavy braking loads. Keep the fluid rated for the temperatures the system will see, and bleed the lines fully after any caliper or hose change.
- Confirm inner wheel clearance with the rotor and caliper installed
- Match pad compound to how the vehicle is driven
- Replace the front rotor and pads together for even braking
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262186R |
| UPC | 844165036999 |
| Sold as | Kit |
| Caliper | Six-piston (6P) fixed, red |
| Rotor outside diameter | 13.0 inch |
| Rotor thickness | 1.1 |
| Rotor type | Two-piece, vented |
| Rotor material | Iron with aluminum hat |
| Surface | Slotted, drilled and zinc plated |
| Wheel bolt pattern | 5×5.00 inch, 5 lug |
| Minimum wheel diameter | 17.0 inch |
| Axle flange | Ford 9 Inch early big bearing |
| Brake pad FMSI number | D0731 |
| Hose material | Steel braided, DOT approved |
| Template | Q082H |
| Park brake | Included in backing plate (one-piece shoe assembly) |
| Country of origin | US |
Vehicle fitment
Fitment is set by the Ford 9 Inch early big bearing axle flange and the 5×5.00 inch wheel bolt pattern, so check the axle housing against your rear end first.
The early big bearing flange is a different housing style from the small bearing 9 Inch flange, so it cannot be swapped in by assumption. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The front rotor, lug nuts and park brake cables all fall outside this kit, so plan to source them before the rear install starts. Check the 17.0 inch minimum wheel diameter against the wheel you plan to run, using the Q082H template for that check. Rear caliper and braided hose work is best left to someone experienced with hydraulic brake systems.
What’s included
The kit covers the 13.0 inch rear rotor with pre-assembled stainless hardware, the six-piston caliper, the backing plate with its park brake shoe assembly, and stainless braided hoses with hardware.
Not included: park brake cables, lug nuts, and the front rotor.















