Overview
The Baer Brakes SS4 Plus 11.0 inch rear brake kit in black, part number 4262690B, suits Ford 8 inch and 9 inch small bearing housing ends on 5×4.5 or 5×4.75 bolt circles. Listed fitment covers 1965–1973 Ford Mustang models, including Mach 1, Boss and Shelby variants.
The 4-piston S4 caliper in black sits over an 11 inch 2-piece slotted, drilled, zinc-plated rotor with an aluminum hat. Stainless braided hoses and brackets are provided, and stainless hardware comes pre-assembled on the rotors. The package does not include a park brake, and lug nuts are not supplied.
Key features
- Black S4 caliper with powder coated finish
- Hard anodized aluminum pistons
- Dual seals guarding against dust, weather and pressure
- CNC machined from forged or billet aluminum
- 2-piece zinc-plated rotor with billet aluminum hat
- Stainless abutments and noise suppression clips
- Steel braided hoses with DOT approval
Brake pad and rotor care
Rear pads and rotors wear together, and the rotor surface shows wear sooner on a vehicle that sees mostly highway miles. Look for a lip at the outer edge of the rotor, uneven pad wear, or grinding noise. Slotted and drilled rotors clear debris and gas, but the slots collect dust and need periodic cleaning.
Brake fluid absorbs moisture over time, which lowers its boiling point and can make the pedal feel spongy during repeated stops. Flush and refill the fluid on a regular schedule, and bleed the system after any caliper or hose work. Keep the wheel studs and hub face clean so the rotor seats flat.
- Check rotor edge for a lip
- Clean slots after wet or muddy use
- Refill brake fluid on schedule
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262690B |
| UPC | 844165047988 |
| Sold as | Kit |
| Axle | Rear |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Axle flange | Ford 8 inch/9 inch small bearing |
| Required axle flange diameter | 5.75 inch |
| Caliper | S4, 4-piston |
| Caliper type | Fixed |
| Caliper color | Black |
| Rotor outside diameter | 11.0 inch |
| Rotor thickness | 1.020 inch |
| Rotor type | 2-piece |
| Rotor construction | Vented |
| Rotor material | Iron with aluminum hat |
| Rotor surface | Slotted, drilled, zinc plated |
| Minimum wheel diameter | 15.0 inch |
| Pad FMSI number | DR1-C |
| Template | S125A |
| Hose material | Steel braided |
| Brake hose DOT approved | Yes |
| Park brake included | No |
| Grade | Performance |
| Country of origin | US |
Vehicle fitment
Listed fitment names 1965–1973 Ford Mustang, with Boss, Grande, Mach 1 and Shelby GT-350, GT-350H, GT-500 and GT-500KR variants.
Ford models other than the Mustang, and Mustang years outside 1965–1973, are not shown. Use the 5.75 inch axle flange diameter and the 5×4.5 or 5×4.75 bolt circle as your match points. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the axle housing type before starting, because this kit is designed for small bearing ends rather than big bearing housings. Hoses and brackets are included, so no lines need to be fabricated. Once fitted, brake the vehicle gently in an open area to confirm pedal feel.
What’s included
Supplied: the black S4 caliper, stainless braided hoses, mounting brackets and hardware, and the 11.0 inch rotor with pre-assembled stainless hardware.
Not included: lug nuts and a park brake.















