Overview
The Baer Brakes 4262276S is an SS4 rear brake kit for Ford 8.8 Inch C-Clip rear ends. It includes a 3.25 Inch axle standoff, a silver S4 caliper, and a 12.0 Inch one-piece slotted, drilled, zinc plated rotor. The 12 inch SS4 suits wheels of 16 inch or larger.
The backing plate mounts the caliper and carries the park brake shoes. Steel braided hoses, DOT approved, come with the kit along with DR1 or HB100 pads. Park brake cables are not part of the kit, and the bolt pattern is 5×4.50.
Key features
- S4 4-piston floating caliper with powder coated silver finish
- CNC machined from forged or billet aluminum
- Dual seals guard against dust, weather and pressure
- Anodized pistons ride alongside stainless steel abutments and noise clips
- 12.0 Inch vented 1-piece rotor, slotted, drilled and zinc plated
- Park brake shoe assembly built into the backing plate
- Steel braided hoses, DOT approved
- Made in Phoenix, Az
Park brake setup
A park brake built into the backing plate works differently from a separate parking system. The shoes sit inside the drum area of the plate, so their adjustment and condition affect how well the car holds on a slope. Because the cables are supplied separately, the cable routing and tension should be planned before the rear assembly goes in.
Shoe wear is the usual sign that the park function needs attention. A soft lever pull or a car that creeps on an incline points to shoes or cables that need adjustment. When replacing either part, check the backing plate for corrosion and make sure the hydraulic and park functions do not interfere with each other.
- Plan cable routing before installing the backing plate
- Adjust park shoes after the first few stops
- Inspect shoes when the rear brakes are serviced
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262276S |
| UPC | 844165038030 |
| Caliper | S4, 4-piston |
| Caliper type | Floating |
| Caliper color | Silver |
| Rotor outside diameter | 12.0 Inch |
| Rotor thickness | 1.020 Inch |
| Rotor type | 1-piece, vented |
| Rotor material | Iron |
| Surface | Slotted, drilled and zinc plated |
| Wheel bolt pattern | 5×4.50 |
| Minimum wheel diameter | 16.0 Inch |
| Axle flange | Ford 8.8 Inch |
| Axle standoff | 3.25 Inch |
| Hose material | Steel braided, DOT approved |
| Park brake | Yes (shoe assembly included) |
| Park brake cables | Not included |
| ABS tone ring | No |
| Pad type | DR1 or HB100 (FMSI DR1), semi-metallic, performance grade |
| Template | S113E |
| Emission code | 6 |
| Country of origin | US |
Vehicle fitment
No fitment list is shown for this kit. Based on the title and description, it is built for Ford 8.8 Inch C-Clip rear ends with a 3.25 Inch axle standoff, so the axle type and standoff are the deciding checks.
Rear axles other than the 8.8 Inch C-Clip design fall outside this kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Park brake cables are not included, so a park brake system using this backing plate needs cables supplied separately. Lug nuts are also not included. Brake work should be completed by a technician trained in hydraulic brake service, with the system bled before use.
What’s included
S4 4-piston silver caliper, 12.0 Inch one-piece rotor, backing plate with park brake shoe assembly, and steel braided brake hoses.
Not included: park brake cables and lug nuts.












