Overview
The Baer Brakes 4262266FR is an SS4 Plus Deep Stage dual rear brake kit for Ford 9 Inch axles with Torino/Late Big Bearing housing ends and a 5×4.50/5×4.75 bolt pattern. It is a drag race system designed for heavy, fast cars that may also see street use, and it fits most 15 inch and larger wheels.
The kit uses four S4 4-piston fixed calipers in Fire Red, each with 1.75 inch hard anodized aluminum pistons, arranged as two dual sets. The rotors are 11.0 inch 2-piece slotted, drilled, zinc-plated vented units with billet aluminum hats. DR1 or HB100 pad types fit this kit, with DR1 as the FMSI number.
Key features
- Four 2-piece, 4-piston S4 calipers in two dual sets, manufactured in Phoenix, Az
- Fire Red powder coated finish
- Hard anodized aluminum pistons with stainless steel abutments and noise suppression clips
- 2-piece slotted, drilled, zinc-plated rotor
- Billet aluminum hats drilled for 5/8 inch wheel studs
- T compliant dust and weather seals
- Rotors pre-assembled with NAS high grade stainless hardware, with mounting hardware included
Choosing pads and setup
Drag and performance rear brakes place a heavy thermal load on pads, rotors and calipers, so pad compound matters. Match the pad type to how the car is driven: the grade should suit the heat and stopping demand, not just the bolt pattern. Semi-metallic friction material transfers heat into the rotor and tolerates high temperatures, but it can be harder on cold rotors and may be noisier when first used.
Because the rotors arrive pre-assembled, check hub and hardware seating before the first session, and re-torque the fasteners after the initial heat cycles. Dual-caliper rear setups need even pad wear on both sides, so inspect the two dual sets together. If one caliper shows uneven wear, check the pistons and slide movement before replacing pads.
- Check pad thickness and rotor surface at each service interval
- Inspect brake hoses and fittings for chafing before each event
- Replace rotor hardware only with matching stainless hardware
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262266FR |
| UPC | 844165037460 |
| Caliper | S4, 4-piston, fixed |
| Caliper quantity | Four (two dual sets) |
| Caliper color | Fire Red |
| Piston size | 1.75 inch |
| Rotor outside diameter | 11.0 inch |
| Rotor type | 2-piece, vented |
| Rotor style | Slotted, drilled, zinc-plated |
| Rotor material | Iron with aluminum hat |
| Rotor thickness | 1.02 |
| Axle flange | Ford 9 Inch Torino/Late Big Bearing |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Minimum wheel diameter | 15.0 inch |
| Pad FMSI number | DR1 |
| Friction material | Semi-metallic |
| Template | S125A |
| Emission code | 6 |
| Park brake | No |
| Brake hoses | Not included |
| Country of origin | US |
Vehicle fitment
This kit is for Ford 9 Inch axles with Torino/Late Big Bearing housing ends. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rotors arrive pre-assembled with stainless hardware, and mounting hardware is included, so check the hardware against your axle before mounting. Brake hoses and lug nuts are not included and must be sourced separately. Confirm the 5×4.50/5×4.75 bolt pattern and housing end match first. Support the vehicle securely while working on rear brakes.
What’s included
- Four S4 calipers in two dual sets
- Two 11.0 inch 2-piece slotted, drilled, zinc-plated rotors with billet aluminum hats
- Pre-assembled rotor hardware and mounting hardware
Not included: brake hoses, lug nuts, park brake components.















