Overview
The Baer Brakes 4262320C is a dual SS4 Plus Deep Stage rear brake set for Ford 9 inch rear axles with small bearing housing ends. Four S4 calipers in a clear finish clamp 11.0 inch 2-piece slotted, drilled rotors, making it a rear drag race brake package for heavy, fast cars that may see street use.
Deep Stage is Baer’s first drag race system built around heavy, fast cars. This version is sized for wheels 15 inch and larger and comes with high friction DR1 pads for drag racing. The axle flange requirement is 5.75 inch, so check the housing before fitting.
Key features
- Four 4-piston S4 calipers with 1.75 inch pistons in clear
- Hard anodized aluminum pistons, stainless steel abutments and noise suppression clips
- 2-piece slotted, drilled, zinc-plated rotors with billet aluminum hats
- Hats drilled for 5/8 inch wheel studs
- High friction pads for drag race applications
- Stainless NAS hardware pre-assembled on the rotors
- Designed for wheels 15 inch and larger
Choosing a caliper count
A four-caliper rear package is a bigger commitment than a standard disc swap, so decide on caliper count only after the axle has been identified. Clamping force rises with more pistons, but the rear hubs, bearings and hard lines must be able to handle that load. Plan the full parts list together so the install does not stop partway through for a missing fitting or a wrong length line.
Clear and painted calipers look different but carry the same drag duty, so finish should not drive the choice. Pistons with stainless abutments reduce sticking in hard use, which helps keep the caliper working as intended. Keep the pad surface and rotor faces clean, and replace worn parts as a matched set so braking stays even from side to side. Inspect the rotor hats and fasteners at each service interval.
- Confirm the axle flange before buying
- Budget for hoses, lug nuts and fittings
- Look for uneven pad wear after each run
- Have a qualified shop handle final torque
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262320C |
| UPC | 844165029755 |
| Caliper | S4, fixed, 4-piston |
| Calipers included | 4 |
| Caliper color | Clear |
| Piston size | 1.75 inch |
| Rotor type | 2-piece, vented, slotted and drilled |
| Rotor outside diameter | 11.0 inch |
| Rotor thickness | 1.02 |
| Rotor material | Iron with aluminum hat |
| Minimum wheel diameter | 15.0 inch |
| Bolt pattern | 5×4.50/5×4.75 |
| Lug count | 5 lug |
| Axle flange | Ford 9 inch Small Bearing |
| Required axle flange | 5.75 inch |
| Friction material | Semi-metallic |
| Pad FMSI number | DR1 |
| Template | S125A |
| Park brake | Not included |
| Hoses | Not included |
| Country of origin | US |
Vehicle fitment
This dual clear kit fits Ford 9 inch rear axles with small bearing housing ends and requires a 5.75 inch axle flange. Measure your housing end and compare it before ordering. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rotors arrive with their stainless hardware and mounting hardware is included, so the key prep is confirming the axle flange. Hoses and lug nuts must be arranged separately. Because this is a drag race setup with four calipers, have a qualified brake technician check the final setup.
What’s included
Four S4 clear calipers with 1.75 inch pistons, 11.0 inch 2-piece slotted and drilled rotors with billet aluminum hats, high friction pads, dust and weather seals, and mounting hardware.
Not included: brake hoses and lug nuts.















