Overview
The Baer Brakes 4262321FR is a Fire Red SS4 Plus Deep Stage rear drag brake kit for Ford 9 Inch Torino (Late Big) bearing housing ends, with a 5×4.50/5×4.75 bolt pattern. It pairs two four-piston S4 calipers with 11-inch two-piece slotted, drilled rotors designed for heavy, fast cars.
This version is built for Ford axle housings with Torino bearing ends, and the kit comes as a single set of rear calipers with no park brake. High friction pads designed for drag race applications come standard, and the rotors arrive pre-assembled with stainless hardware. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Two-piece S4 rear calipers with four pistons each, in Fire Red powder coat
- 1.75 inch hard anodized aluminum pistons with stainless steel abutments
- High friction pads designed for drag race applications
- Two-piece slotted, drilled, zinc-plated rotors with an 11.0 inch outside diameter
- Billet aluminum hats drilled for 5/8 inch wheel studs
- Designed for wheels with a 15.0 inch minimum diameter
Choosing a drag brake setup
Rear drag brakes on a heavy car work differently from street brakes. The calipers clamp rotors that take repeated hard stops after a launch, so heat builds quickly and pad material matters. Semi-metallic pads are a common choice for this kind of use because they handle heat well, though they can be noisier and produce more dust than street compounds. Pads should be matched to how the car is driven rather than chosen on looks alone.
Before buying, check the axle housing type, flange dimension and wheel clearance, because those decide whether a drag kit will mount at all. Wheel diameter sets the room for the calipers and rotors, so the minimum wheel diameter should be treated as a hard limit. Once installed, check the axle, hub faces and studs for wear, and inspect the rotor hats for cracks after heavy use.
- Clean and check the hub and rotor mounting faces before fitting
- Re-torque lug nuts after the first few runs
- Inspect pads and rotor surfaces for heat cracking after each event
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262321FR |
| UPC | 844165038436 |
| Kit contents | Two S4 rear calipers, two-piece rotors, high friction pads, mounting hardware |
| Caliper | S4, four pistons, fixed type, Fire Red |
| Piston diameter | 1.75 inch |
| Rotor outside diameter | 11.0 inch |
| Rotor thickness | 1.02 |
| Rotor construction | Two-piece, vented, slotted and drilled, zinc plated |
| Rotor material | Iron with aluminum hat |
| Axle flange | Ford 9 Inch Torino/Late Big Bearing |
| Axle flange dimension | 5.75 inch |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Lug count | 5 lug |
| Minimum wheel diameter | 15.0 inch |
| Pad type | DR1 (FMSI) |
| Friction material | Semi-metallic |
| Hub | Billet aluminum, drilled for 5/8 inch wheel studs |
| Park brake | Not included |
| Hoses | Not included |
| Front rotor included | No |
| Lug nuts included | No |
| Country of origin | US |
Vehicle fitment
No vehicle years, makes or models are given for this kit. It is built for Ford 9 Inch Torino (Late Big) bearing housing ends, so confirm that your rear axle carries that housing type before ordering.
GM small pattern 10/12 bolt housing ends are a different flange and are not covered by this kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rotors come pre-assembled with stainless hardware, and mounting hardware is included. The Torino bearing housing ends need to meet the 5.75 inch axle flange requirement, so verify that dimension before installing. Lug nuts, hoses and a park brake are not included.
What’s included
Two S4 four-piston rear calipers in Fire Red with 1.75 inch pistons, two-piece rotors pre-assembled with stainless hardware, high friction drag race pads, and mounting hardware.
Not included: front rotors, park brake, hoses and lug nuts.















