Overview
The Baer Brakes 4262682FR is an SS4 Plus Deep Stage rear brake kit for Ford 9 inch rear axles with early big bearing housing ends. Four S4 calipers in Fire Red clamp two 11 inch two-piece slotted, drilled rotors, so each rear wheel gets a pair of calipers for drag racing use.
The kit comes with high friction pads designed for drag race applications. The system suits heavy, quick cars that may also be driven on the street, and this smaller package fits wheels 15 inch and larger. Confirm the axle flange style and its 5.75 inch measurement before buying.
Key features
- Four-piston S4 calipers in Fire Red, with 1.375 inch pistons.
- High friction drag race pads are standard with this kit.
- Aluminum pistons with a hard anodized surface, paired with stainless steel abutments and noise suppression clips.
- Two-piece 11 inch rotors, slotted, drilled and zinc plated, mounted to aluminum hats.
- Billet aluminum hats drilled for 5/8 inch wheel studs.
- NAS high grade stainless hardware comes pre-assembled to the rotors, and mounting hardware is included.
- Powder coated caliper finish, with a DR1 pad FMSI number.
Drag pads and heat
Pad compound matters as much as caliper size. Drag-oriented friction material is aimed at high temperature bursts and quick stops from speed, but it usually trades cold grip and noise for that performance. Drivers who commute in the same car should weigh that trade-off before choosing a pad.
Pads wear faster when used hard, so check thickness at each service and replace them before they reach the wear limit. Bedding in new pads with a few controlled stops helps them transfer an even layer to the rotor. Rotor faces should be inspected for grooves, blue discoloration or cracking whenever pads are changed.
Rear brake upgrades also change front-to-rear balance, so a proportioning valve or front brake check may be part of the plan. Hoses, fluid choice and a clean bleed matter for consistent pedal feel under repeated hard braking.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262682FR |
| UPC | 844165049036 |
| Sold as | Set |
| Caliper | S4, 4-piston, fixed, two-piece |
| Caliper color | Fire Red |
| Caliper quantity | 4 |
| Piston diameter | 1.375 inch |
| Piston material | Hard anodized aluminum |
| Rotor outside diameter | 11.0 inch |
| Rotor thickness | 1.02 |
| Rotor type | 2-piece, vented |
| Rotor style | Slotted, drilled, zinc plated |
| Rotor material | Iron with aluminum hat |
| Hat | Billet aluminum, drilled for 5/8 inch wheel studs |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×4.50/5×4.75 (in) |
| Minimum wheel diameter | 15.0 inch |
| Axle flange type | Ford 9 inch early big bearing |
| Axle flange requirement | 5.75 inch |
| Pad FMSI number | DR1 |
| Friction material | Semi-metallic |
| Grade type | Performance |
| Template | S125A |
| Park brake | No |
| Country of origin | US |
Vehicle fitment
The 4262682FR is designed for Ford 9 inch rear axles with early big bearing housing ends, so the axle housing and flange style decide whether it is the right match.
Compare your axle housing and its 5.75 inch flange before buying. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
High friction pads are standard, and the rotors come with hardware already fitted. Brake hoses are not included and need to be obtained for the calipers. Rear brake work should be handled by a qualified installer, who should bleed the system before the vehicle is driven.
What’s included
Four Fire Red S4 calipers as two sets, two-piece rotors with billet aluminum hats, high friction drag race pads, pre-assembled NAS high grade stainless hardware and mounting hardware.
Not included: Front rotors, park brake, lug nuts and brake hoses.















