Select your vehicle

Baer Brakes SS4 Plus Deep Stage Rear-Rear Ends W/Ford 9 Inch Early Big Bearing Housing Ends (5X4.5 Inch 5X4.75 Inch BC) Includes Dual (Two Sets) Of Calipers Clear 1.375 Inch Pistons – 4262682C

Baer Brakes

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • No vehicle fitment is listed; designed for Ford 9 inch rear axles with early big bearing housing ends
  • Part number 4262682C: two sets of clear S4 calipers, four in total, with 1.375 inch pistons
  • High friction drag race pads come standard with the kit.
  • Two-piece 11 inch slotted, drilled rotors; minimum wheel diameter 15.0 inch

Description

Overview

The Baer Brakes 4262682C is a Deep Stage rear brake package from the SS4 Plus range, made for Ford 9 inch rear ends with early big bearing housing ends. Two sets of S4 calipers, four in total, use 1.375 inch pistons to squeeze 11 inch two-piece slotted, drilled rotors in a clear finish.

The included high friction pads are designed for drag race applications. The setup suits heavy, quick cars that may also be driven on the street. Fit depends on the axle, and the axle flange must measure 5.75 inch. The system is meant for wheels 15 inch and larger. Confirm fit for your vehicle’s year, model and trim before ordering.

Key features

  • Clear-finish S4 calipers with four pistons each and 1.375 inch pistons.
  • Dust and weather seals are part of the caliper design.
  • Hard anodized pistons are backed by stainless steel abutments that work with noise suppression clips.
  • Zinc plated two-piece rotors, slotted and drilled, built with iron and aluminum hats.
  • Billet aluminum hats with holes drilled for 5/8 inch wheel studs.
  • Powder coated finish across the caliper bodies.
  • High friction pads designed for drag racing come standard.

Before you buy

Before buying a rear brake package, measure the axle and confirm the flange style first, since the hub and bearing housing ends determine how the kit mounts. Wheel clearance matters too. A 15 inch minimum wheel diameter leaves room for large two-piece rotors and four-piston calipers, but tire and wheel offset still need to clear the caliper bodies at full steering lock.

Expect to source brake hoses separately and plan for a fluid change and full bleed after installation. Brake fluid absorbs moisture over time, so use fresh fluid of the correct type. Pad choice should match how the car is used. Drag pads grip hard when cold but wear faster on the street, and they often need heat before they work well.

Inspect the rotors and pads at each service. Look for heat cracks, uneven wear, or a lip at the rotor edge. Recheck bolt torque on the hats and caliper brackets after the first few drives, and check the lines for leaks.

  • Measure the axle flange before ordering
  • Confirm wheel and tire clearance over the calipers
  • Plan for brake hoses and a full bleed
  • Match pad compound to street or track use

Specifications

Brand Baer Brakes
Part number 4262682C
UPC 844165049029
Sold as Set
Caliper S4, 4-piston, fixed, two-piece
Caliper color Clear
Caliper quantity 4
Piston diameter 1.375 inch
Piston material Hard anodized aluminum
Rotor outside diameter 11.0 inch
Rotor thickness 1.02
Rotor type 2-piece, vented
Rotor style Slotted, drilled, zinc plated
Rotor material Iron with aluminum hat
Hat Billet aluminum, drilled for 5/8 inch wheel studs
Lug count 5 lug
Wheel bolt pattern 5×4.50/5×4.75 (in)
Minimum wheel diameter 15.0 inch
Axle flange type Ford 9 inch early big bearing
Axle flange requirement 5.75 inch
Pad FMSI number DR1
Friction material Semi-metallic
Grade type Performance
Template S125A
Park brake No
Country of origin US

Vehicle fitment

The 4262682C is made for the Ford 9 inch rear axle with early big bearing housing ends, an axle flange style rather than a model year. Verify the early big bearing flange and the 5.75 inch measurement before buying. Confirm your vehicle’s year, model and trim before ordering.

Verify the early big bearing flange and the 5.75 inch measurement before buying. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The rear rotors are supplied with hardware fitted, and mounting hardware is included. Brake hoses are not part of this package, so plan on sourcing them separately. A qualified installer should handle the hydraulic work and bleed the brakes before the car is driven.

What’s included

Four clear S4 calipers in two sets, two-piece slotted and drilled rotors with billet aluminum hats, high friction pads, stainless hardware on the rotors and mounting hardware. Sold as a set.

Not included: Front rotors, park brake, lug nuts and brake hoses.

Specification

Shipping weight 48 lbs
Package dimensions 15 × 15 × 15 in
brands

Sold as

Set

Wheel bolt pattern (in)

5×4.50/5×4.75

Lug nuts

5 Lug

Rotor type

2-Piece

Rotor style

Slotted, Drilled

Rotor construction

2-Piece

Rotor material

Iron w/Aluminum Hat

Front rotor included

No

Park brake

No

Lug nuts included

No

Axle housing flange type

Big Bearing

Country of origin

US

Questions & Answers

What does part number 4262682C include?

Part number 4262682C is a Baer Brakes SS4 Plus Deep Stage rear kit for Ford 9 inch early big bearing housing ends. It includes two sets of clear S4 calipers, four in total, plus two 11 inch slotted, drilled rotors with billet aluminum hats.

Is this kit made for a specific vehicle year?

No. The kit is made for Ford 9 inch rear axles with early big bearing housing ends, an axle flange style rather than a model year. Verify the flange and the 5.75 inch requirement before buying.

What wheel size does the 4262682C need?

The system fits most wheels 15 inch and larger, and the minimum wheel diameter is 15.0 inch. The bolt pattern is 5x4.50/5x4.75 with 5 lug, so check that your wheels match before fitting.

Are high friction pads included with this kit?

Yes. High friction pads designed for drag race applications come standard with the kit. The pad FMSI number is DR1 and the friction material is semi-metallic.

How should the pads be bedded in after installation?

Bed the pads in with a series of moderate stops before aggressive use, letting the brakes cool between runs. This transfers an even pad layer onto the rotors and helps prevent judder and uneven braking.

How can you tell the rotors need replacing?

Replace the rotors if you see deep heat cracks, a raised lip at the edge, heavy grooving, or pulsing under braking. Measure thickness against the minimum stamped on the rotor before deciding.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon