Overview
The Baer Brakes 4262265S is an SS4 Plus rear brake kit with a 13.0 inch rotor for Ford 9 Inch Torino (Late Big) bearing housing ends and a 5×5.00 bolt pattern. It is built around a 4-piston S4 caliper and includes a park brake, which is the main difference from the dual Deep Stage kits.
The 13 inch SS4 Plus is for wheels 17 inch and larger. The backing plate serves as the caliper mount and houses a 1-piece park brake shoe assembly. Fit can vary across wheel styles, so compare the S135H template with the wheel before buying.
Key features
- 2-piece, 4-piston S4 caliper manufactured in Phoenix, Az
- CNC machined from US sourced forged or billet aluminum
- Powder coated silver finish
- Hard anodized aluminum pistons with stainless steel abutments and noise suppression clips
- Dual seals for dust, weather and pressure
- 2-piece slotted, drilled, zinc-plated rotor with billet aluminum hat
- Park brake shoe assembly built into the backing plate
Park brake considerations
The park brake shoe sits inside the backing plate, so service on the parking function happens at the same time as caliper and rotor work. Shoe linings wear gradually, and a lever that travels farther than before is an early sign they need attention. Cables are a separate purchase and should be routed away from heat sources and moving suspension parts.
When choosing this kit, consider how the park brake will be used. A parking function that has not been adjusted properly can fail to hold on a slope even when the hydraulic brakes are sound. Inspect the shoe assembly each time the rotor comes off, and keep the backing plate free of grease and road debris.
- Check shoe lining thickness at each brake service
- Route park brake cables clear of heat and moving parts
- Keep the backing plate free of grease and debris
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262265S |
| UPC | 844165028659 |
| Caliper | S4, 4-piston, fixed |
| Caliper color | Silver |
| Rotor outside diameter | 13.0 inch |
| Rotor type | 2-piece, vented |
| Rotor style | Slotted, drilled, zinc-plated |
| Rotor material | Iron with aluminum hat |
| Rotor thickness | 0.81 |
| Axle flange | Ford 9 Inch Torino (Late Big) Bearing |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×5.00 |
| Minimum wheel diameter | 17.0 inch |
| Pad FMSI number | DR1-C |
| Template | S135H |
| Park brake | Yes, shoe assembly included |
| Park brake cables | Not included |
| Brake hose | DOT approved |
| Lug nuts | Not included |
| Emission code | 6 |
| Sold as | Kit |
| Country of origin | US |
Vehicle fitment
It is built for Ford 9 Inch Torino (Late Big) bearing housing ends, an axle type rather than specific years or models, so covered vehicles are determined by axle. Confirm fit for your vehicle’s year, model and trim, and check the S135H template before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The park brake shoe assembly sits inside the backing plate, so the park brake is part of the rear assembly. Park brake cables are not included, so plan to source them separately. Lug nuts are also not included. Confirm the 5×5.00 bolt pattern and the S135H template against your wheel before mounting.
What’s included
- One 4-piston S4 caliper in silver, mounted to a backing plate with park brake shoe assembly
- One 13.0 inch 2-piece rotor with billet aluminum hat
- DOT approved braided hoses and hardware
- Pre-assembled rotor hardware
Not included: park brake cables, lug nuts.















