Overview
The Baer Brakes 4262653R is a red rear brake system kit for Ford 8 inch and 9 inch small bearing axle housings with a 5×5.00 inch bolt pattern. It pairs a four-piston S4 fixed caliper with a 13 inch two-piece slotted, drilled and zinc-plated rotor, and the backing plate carries a one-piece park brake shoe assembly.
The SS4 Plus pairs a larger rear rotor with a CNC machined caliper from US sourced forged or billet aluminum, powder coated for finish. The 13 inch rotor is intended for most wheels 17 inch or larger, and wheel style can affect clearance.
Key features
- Four-piston S4 caliper in red, manufactured in Phoenix, Az
- Two-piece slotted, drilled and zinc-plated rotor with billet aluminum hat
- Hard anodized aluminum pistons with stainless steel abutments and noise suppression clips
- Dual seals for dust, weather and pressure
- DOT approved stainless braided hoses
- DR1-C pad type, a popular Baer pad designation
- One-piece park brake shoe assembly housed in the backing plate
- NAS high grade stainless hardware pre-assembled on the rotors
Pad choice and bedding in
Pad compound affects how the SS4 Plus brakes when cold, hot and wet. A pad designed for street use may fade on a long downhill, while a harder compound can be noisy and wear rotors faster. Match the compound to the actual driving, and bed in new pads gradually before any heavy stops.
Bedding in new pads means a series of moderate stops that transfer an even layer of friction material to the rotor. Skipping this step can cause judder and reduced bite. After bedding, check that the rotor surface is clean and that the caliper slides freely on its pins.
- Use the same pad type on both sides of the axle
- Keep the rotor surface free of oil and grease
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262653R |
| UPC | 844165038689 |
| Caliper | S4, four pistons, fixed type |
| Caliper color | Red |
| Pad FMSI number | DR1-C |
| Rotor outside diameter | 13.0 inch |
| Rotor thickness | 0.81 |
| Rotor type | 2-piece, vented |
| Rotor material | Iron with aluminum hat |
| Surface | Slotted, drilled and zinc plated |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×5.00 inch |
| Axle flange | Ford 8 inch/9 inch small bearing |
| Minimum wheel diameter | 17.0 inch |
| Hose material | Steel braided |
| Park brake included | Yes |
| Park brake cables included | No |
| Template | S135H |
| Grade | Performance |
| Country of origin | US |
Vehicle fitment
It is made for rear axles with Ford 8 inch or 9 inch small bearing axle flanges. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering. This is a rear kit, and the axle flange sizes named here identify an axle, not a vehicle.
Installation notes
The rotors come with NAS high grade stainless hardware already pre-assembled, and stainless braided hoses are supplied with the kit. Because park brake cables are not included, existing cables must be reused or replaced before the park brake can be connected. Check wheel clearance against the S135H template before mounting, since the 17 inch minimum wheel diameter is the key clearance figure.
What’s included
The kit provides the red S4 four-piston caliper, the two-piece slotted rotor with pre-assembled hardware, stainless braided hoses, and the park brake shoe assembly housed in the backing plate.
Not included: Lug nuts and park brake cables are not supplied, and the front rotor is not part of this rear kit.















