Overview
The Baer Brakes 4302333R is a red rear brake kit in the SS4 Plus family, with an S4 four-piston caliper clamping a 13 inch two-piece slotted, drilled rotor. The housing is a GM small pattern 10/12 bolt bearing-on-axle design, and the wheel bolt pattern is 5×4.75/5×5.00. Match the axle flange to your rear end before ordering.
Each caliper is manufactured in Phoenix, Az from billet aluminum, and the rear backing plate carries a one-piece park brake shoe so the parking brake sits inside the housing. The kit runs DR1-C pads and stainless braided hoses. It suits buyers who want a red finish on a GM 10/12 bolt hybrid housing under part number 4302333R.
Key features
- Red powder-coated S4 four-piston caliper
- Hard anodized aluminum pistons with stainless steel abutments
- Dual seals for dust, weather and pressure
- Slotted, drilled, zinc-plated 13 inch rotor on a billet aluminum hat
- Rotors arrive pre-assembled with NAS high grade stainless hardware
- Stainless braided hoses and hardware included
Red finish and upkeep
A red powder-coated caliper shows road grime and brake dust more readily than darker finishes, so a regular rinse keeps it looking fresh. Use mild soap and water, and avoid harsh solvents that can dull the coating around the piston area. Keep brake fluid clean and sealed, since moisture in old fluid affects pedal feel under heavy use.
The rotor and pads do most of the work, so inspect them together. Look for uneven rotor wear, thin pad material, or grooves that catch the pad surface. Slotted and drilled rotors help shed heat and gas but still wear, so plan replacement by measured thickness rather than appearance alone.
- Check pad thickness at each tire rotation
- Look for scoring or uneven rotor wear
- Inspect braided hoses for chafing or bulging
- Confirm the caliper slides move freely
- Recheck lug nut torque after the first drives
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4302333R |
| UPC | 844165028765 |
| Axle | Rear |
| Axle flange | GM small pattern 10/12 bolt, bearing on axle (hybrid) |
| Wheel bolt pattern | 5×4.75/5×5.00 |
| Lug count | 5 lug |
| Caliper | S4, four-piston, fixed |
| Caliper color | Red |
| Pad type | DR1-C (FMSI DR1-C) |
| Rotor outside diameter | 13.0 inch |
| Rotor thickness | 0.81 |
| Rotor type | 2-piece, vented |
| Rotor material | Iron with aluminum hat |
| Rotor surface | Slotted, drilled and zinc plated |
| Minimum wheel diameter | 17.0 inch |
| Brake hose | Steel braided, DOT approved |
| Park brake | Included |
| Template | S135H |
| Emission code | 6 |
| Grade | Performance |
| Country of origin | US |
Vehicle fitment
This kit is made for rear axles with a GM small pattern 10/12 bolt bearing-on-axle flange, the pattern used on Buick, Olds and Pontiac applications.
Front axles and other flange patterns fall outside this kit. Verify your vehicle’s year, model and trim before buying.
Installation notes
The backing plate doubles as the park brake housing, so the parking brake hardware comes with the rear assembly. Park brake cables are not included and need separate planning. Baer advises comparing the S135H template with the chosen wheel before mounting, because wheel style affects clearance. A qualified technician should handle the installation.
What’s included
The package covers the S4 caliper, Baer’s backing plate with its one-piece park brake shoe assembly, the 13 inch two-piece rotor with pre-assembled stainless hardware, and stainless braided hoses with their hardware.
Not included: Park brake cables, lug nuts and a front rotor.















