Overview
The Baer Brakes 4262263S is a 13-inch two-piece rear disc brake kit with an SS4 Plus four-piston caliper in silver, built for Ford 9 Inch rear ends with Torino (Late Big) bearing housing ends. It is drilled for both 5×4.50 and 5×4.75 wheel bolt patterns.
The rotor arrives pre-assembled with NAS high grade stainless hardware on a billet aluminum hat, and the backing plate carries a one-piece park brake shoe assembly. The 13-inch SS4 Plus suits wheels 17 inches and larger.
Key features
- Four-piston S4 caliper in silver, fixed type
- 13.0 inch two-piece slotted, drilled, zinc-plated rotor on a billet aluminum hat
- Rotor pre-assembled with NAS high grade stainless hardware
- One-piece park brake shoe assembly housed in the backing plate
- Hard anodized aluminum pistons with stainless steel abutments and noise suppression clips
- Dual dust, weather and pressure seals
- Stainless steel braided hoses and hardware included
- Pads: DR1-C, FMSI DR1-C
Before you buy
Large rotors add rotational mass and leave less room behind the wheel, so the choice of wheel and caliper should be made together. A two-piece rotor with an aluminum hat keeps weight down at the hub, but the hat and rotor are usually replaced as one unit when the friction ring wears.
Rear brake work also touches the parking brake. On a drum or shoe-type park brake, adjustment and cable tension affect how well the vehicle holds on a grade. Plan the cable routing and tension check before the first drive, and look at the caliper slide pins and hoses while the wheel is off.
- Confirm axle flange and bearing pattern before purchase
- Keep the hat and hardware torque values from the installation steps
- Inspect braided hoses for chafing at each service
- Bed in new pads gradually before heavy trail use
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262263S |
| UPC | 844165028536 |
| Sold as | Kit |
| Caliper | S4 Plus, four-piston, fixed |
| Caliper color | Silver |
| Rotor outside diameter | 13.0 inch |
| Rotor type | Two-piece, slotted, drilled, zinc plated |
| Rotor construction | Vented |
| Rotor material | Iron with aluminum hat |
| Rotor thickness | 0.81 |
| Pad type | DR1-C (FMSI DR1-C) |
| Park brake | Included, one-piece shoe assembly |
| Brake hose | Stainless steel braided, DOT approved |
| Axle flange | Ford 9 Inch Torino / Late Big bearing |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Lug count | 5 lug |
| Minimum wheel diameter | 17.0 inch |
| Template | S135H |
| Emission code | 6 |
| Country of origin | US |
Vehicle fitment
Fits Ford 9 Inch rear axles with Torino (Late Big) bearing housing ends and two five-lug patterns, 5×4.50 and 5×4.75. Confirm your vehicle’s year, model and trim before ordering.
Baer cannot verify wheel fit for every style, so check clearance against template S135H. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the rotor hardware comes pre-assembled, the hat and rotor install as one unit. Park brake cables are not supplied, so route and connect them before relying on the parking brake. Bleed the hydraulic lines once the braided hoses are fitted.
What’s included
The kit includes the silver S4 Plus caliper, the 13-inch two-piece rotor with its aluminum hat and stainless hardware, the backing plate with the park brake shoe assembly, and stainless braided hoses with hardware.
Not included: lug nuts must be bought separately, and park brake cables are also excluded.















