Overview
The Baer Brakes Claw front rotor and pad combo kit, part number 31328-1015, is a front brake upgrade for the 2004–2005 Nissan Titan. Baer sells it as one set: slotted, drilled and zinc-plated rotors, Claw ceramic performance street pads and the stainless-steel abutment and noise suppression hardware that holds them in place.
The Claw kit suits drivers who want stronger braking and a sharper look without moving to track-only parts. The one-piece full-cast rotors are vented with a directional brake surface, and the kit balances performance with road-going comfort for daily drivers, trucks and SUVs. It is covered for the 2004–2005 Nissan Titan.
Key features
- Slotted, drilled and zinc-plated rotors, which Baer says improve performance and appearance
- Direct bolt-on replacement for the front axle, with no modifications needed.
- Claw ceramic performance street pads matched to the rotor design
- Stainless-steel abutment and noise suppression hardware included
- Pad shims and abutment clips included
- One-piece, full-cast vented rotor with a directional brake surface
- Premium grade type.
Before you buy
Front rotors and pads wear together, so many owners replace both at the same service. Check pad thickness, measure the rotor against the minimum thickness stamped on it, and look for deep scoring or pulsation under braking. If the rotor is at or below that limit, replacing the pair is the usual choice, since a worn rotor can quickly damage new pads.
A fresh pad needs a proper bedding procedure so material transfers evenly onto the new rotor surface. Slotted and drilled rotors clear debris and gas, but they can change pad wear and noise, so a ceramic street pad selected for the rotor design is a practical pairing. Keep the abutment clips and pad shims fresh at each service, and use a suitable brake lubricant on sliding contact points.
- Confirm the rotor thickness before reuse
- Inspect caliper slide pins for free movement
- Bed in the new pads with a series of moderate stops
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 31328-1015 |
| UPC | 844165052937 |
| Axle | Front |
| Rotor construction | One piece, full cast |
| Rotor type | Vented, directional brake surface |
| Surface type | Slotted, drilled and zinc plated |
| Rotor material | Cast iron |
| Pad friction material | Ceramic |
| Grade type | Premium |
| Abutment clips included | Yes |
| Pad shims included | Yes |
| Brake lubricant included | No |
| Emission code | 6 |
| Country of origin | USA |
| Sold as | Kit |
Vehicle fitment
Covered for the 2004–2005 Nissan Titan only. Confirm fit for your vehicle’s year, model and trim before ordering, including any Infiniti QX56 or Nissan Armada.
Covered models are the 2004–2005 Nissan Titan. Check the fit against your exact year, model and trim before buying.
Installation notes
Abutment clips and pad shims come with the kit, but brake lubricant does not, so keep a suitable lubricant on hand for the install. Work on the front brakes only with the vehicle safely supported on stands.
What’s included
The kit includes a pair of slotted, drilled and zinc-plated Claw rotors, a set of Claw ceramic performance street pads, stainless-steel abutment and noise suppression hardware, abutment clips and pad shims.
Not included: Brake lubricant.
