Overview
The Baer Brakes 4262653B is a black rear disc brake kit built for Ford 8 inch and 9 inch small bearing axle housings on a 5×5.00 inch bolt pattern. Its four-piston S4 caliper squeezes a 13 inch two-piece slotted and drilled rotor, and the backing plate houses a one-piece park brake shoe assembly.
The S4 Plus is Baer’s performance grade option, aimed at owners running wheels that are at least 17 inch in diameter. The caliper body is CNC machined from billet aluminum sourced in the US. Wheel fit should be checked with Baer’s template, since compatibility with every wheel design cannot be guaranteed.
Key features
- Four-piston S4 caliper in black, manufactured in Phoenix, Az
- Two-piece slotted, drilled and zinc-plated rotor with a billet aluminum hat
- Hard anodized aluminum pistons with stainless steel abutments and noise suppression clips
- Dual seals guarding against dust, weather and pressure
- Steel braided stainless hoses rated DOT approved
- DR1-C pad type with a modern one-piece park brake shoe in the backing plate
- Pre-assembled NAS high grade stainless hardware on the rotor
Before you buy
Rear disc brake kits like this one replace the stock drum or disc setup at the axle, so it helps to know what the rest of the rear end is doing before you start. The rotor, caliper, pads and park brake shoe all work together, and a change at one corner usually means checking the others. Look at your wheel’s backspacing and clearance first, then confirm the rotor’s diameter and the caliper’s position against the template.
Expect the park brake to need attention. This kit includes the shoe assembly but not the cables, so inspect the existing cables for stretching, rust and sticky movement. Replacing worn cables during the same job is far easier than reopening the backing plate later.
Brake fluid and hose condition also matter. Braided lines flex better than rubber under suspension travel, yet they still need checking for chafing against the frame or axle. Bleed the system fully after installation and recheck fluid level after the first few stops.
- Check wheel clearance against the template before mounting
- Inspect park brake cables before reusing them
- Replace worn pads and rotor together for even wear
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262653B |
| UPC | 844165038672 |
| Caliper | S4, four pistons, fixed type |
| Caliper color | Black |
| Pad FMSI number | DR1-C |
| Rotor outside diameter | 13.0 inch |
| Rotor thickness | 0.81 |
| Rotor type | 2-piece, vented |
| Rotor material | Iron with aluminum hat |
| Surface | Slotted, drilled and zinc plated |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×5.00 inch |
| Axle flange | Ford 8 inch/9 inch small bearing |
| Minimum wheel diameter | 17.0 inch |
| Hose material | Steel braided |
| Park brake included | Yes |
| Park brake cables included | No |
| Template | S135H |
| Emission code | 6 |
| Grade | Performance |
| Country of origin | US |
Vehicle fitment
It is designed for rear axles with Ford 8 inch or 9 inch small bearing axle flanges. The flange size identifies an axle rather than a specific year, make and model, so confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering. Front axle brakes are outside this rear kit, and the flange sizes named here identify an axle, not a vehicle.
Installation notes
Dual seals and pre-assembled stainless hardware come with the rotor, and the steel braided hoses are included as well. Park brake cables are not part of this package, so existing cables must be reused or replaced before connecting the park brake. Verify the S135H template against your wheel before mounting, since the 17 inch minimum wheel diameter is the controlling clearance figure.
What’s included
The kit contains the black S4 four-piston caliper, the two-piece slotted and drilled rotor with its hardware, the steel braided hoses, and the one-piece park brake shoe assembly in the backing plate.
Not included: Outside this kit are the lug nuts, the park brake cable set and the front rotor.















