Overview
The Baer Brakes 4301579HO is a Pro Plus front brake kit in Hugger Orange, sized for 1988–1998 Chevrolet and GMC C1500 2WD trucks and 1992–1999 C1500 Suburban SUVs. Its core is a 6-piston 6P caliper paired with a 14-inch two-piece rotor, sold as a complete kit.
Baer built the caliper with stainless steel pistons, abutments and noise suppression clips, plus dual dust, weather and pressure seals. Pistons are staggered so that pad wear stays more even. Billet aluminum hubs arrive with premium bearings and grease, and the kit runs D0731 pads.
Key features
- Hugger Orange 6P caliper, six pistons, fixed design
- Staggered pistons intended to minimize uneven pad wear
- Stainless steel pistons, abutments and noise suppression clips
- Dust, weather and pressure seals on each caliper
- 14-inch two-piece slotted, drilled and zinc-plated rotor with billet aluminum hat
- Hubs with billet dust caps and premium bearings packed in Redline synthetic grease
- Stainless braided hoses, mounting brackets and hardware included
Bedding in pads and rotors
New pads and rotors need a controlled break-in before they perform as expected. Pad material transfers a thin layer onto the rotor surface, and that layer is what gives consistent friction. Several moderate stops from a moderate speed, followed by a cool-down drive, are a common way to set that layer.
Avoid hard stops right after installation and avoid riding the brakes on long downgrades until the pads are seated. Slotted and drilled rotors help clear gas and debris but do not replace proper bedding. If the pedal feels spongy or smells hot after the break-in, stop and let the system cool before checking for leaks or sticking pistons.
- Use moderate stops during the first drives
- Let the brakes cool between bedding sessions
- Check fluid level and lines after the first run
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4301579HO |
| UPC | 90127934777 |
| Sold as | Kit |
| Caliper | 6P, 6-piston, fixed |
| Caliper color | Hugger Orange |
| Rotor | 14.0 inch vented, 2-piece |
| Rotor surface | Slotted, drilled and zinc plated |
| Rotor thickness | 1.15 |
| Minimum wheel diameter | 18.0 inch |
| Pad FMSI number | D0731 |
| Hub | Billet aluminum |
| Brake hose | Steel braided, DOT approved |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×5.00 |
| Wheel stud size | M14-1.50 x 47.5mm |
| Drive | 2WD |
| Axle | Front |
| Spindles included | No |
| Fitment notes | w/React 2 Inch Drop Spindles |
| Template | Q117P |
| Emission code | 6 |
| Grade type | Performance |
| Country of origin | USA |
Vehicle fitment
Covered models are the 1988–1998 Chevrolet C1500, 1992–1999 Chevrolet C1500 Suburban, 1995–1999 Chevrolet Tahoe, 1988–1998 GMC C1500, 1992–1999 GMC C1500 Suburban and 1992–1999 GMC Yukon, all with 2WD drive.
The fitment does not extend to 4WD trucks or to model years outside the ranges above. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Drop spindles are not included, so the React 2 Inch Drop Spindles must be on the vehicle or bought separately before the caliper and rotor go on. The rotors come pre-assembled with stainless hardware. Use the Q117P template to verify that your wheel clears the 14-inch rotor and the 6-piston caliper, because Baer does not guarantee clearance with every wheel style. A qualified technician should complete the install and bleed the brakes.
What’s included
Included are the Hugger Orange 6P calipers, 14-inch two-piece rotors with billet aluminum hats, hubs with bearings and billet dust caps, mounting brackets, stainless braided hoses and the hardware kit.
Not included: React 2 Inch Drop Spindles and wheels.
