Overview
Baer Brakes’ Pro Plus rear kit, part number 4302249B, is a 14-inch two-piece slotted, drilled and zinc-plated rear disc brake system with a black 6-piston caliper. It fits rear axles with a GM 10/12 bolt small car pattern flange and C-clip axles, on a 5 on 4.75 inch and 5 on 5 inch bolt circle.
Each rear backing plate is also the caliper mount and holds a one-piece park brake shoe assembly, so the park brake is part of the rear unit. The 14-inch Pro Plus is intended for wheels of 18 inches or larger. Baer does not guarantee fit with every wheel style, so compare your wheel against template Q110P before anything is bolted up.
Key features
- Black powder-coated 6P caliper with six pistons
- Staggered pistons help even out pad wear
- Stainless steel pistons, abutments and noise suppression clips
- Dual seals guard against dust, weather and pressure
- Billet aluminum hat on a two-piece rotor with slot, drill and zinc-plate surface
- Park brake shoe assembly built into the backing plate
- Steel braided hoses, DOT approved, with stainless hardware
- Pad type D0731 (FMSI number)
Park brake and rear wheel setup
A rear disc kit with an integrated park brake changes more than the stopping hardware. The park brake shoe assembly sits inside the rear backing plate, so cable routing and adjustment should be checked as part of the same job rather than left for later. Old cables that stretch or corrode can leave the park brake weak even when the rotors look fine.
Dust, moisture and road salt collect on calipers and backing plates over time. Rinse the assembly after muddy or salty drives, and re-check the mounting bolts after the first few trips. Inspect pads and rotors at regular service intervals, and replace pads as a matched set on each axle so braking stays even.
- Route park brake cables clear of moving parts
- Re-check mounting bolts after the first few trips
- Replace pads as a set on each axle
- Inspect the backing plate for corrosion at service
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4302249B |
| UPC | 844165043034 |
| Rotor diameter | 14.0 inch |
| Rotor thickness | 1.15 |
| Rotor type | 2-piece, vented |
| Rotor surface | Slotted, drilled and zinc plated |
| Rotor material | Iron with aluminum hat |
| Caliper | 6-piston floating, black |
| Pad type | FMSI D0731 |
| Brake hose | Steel braided, DOT approved |
| Park brake | Included |
| Park brake cables | Not included |
| Axle flange | GM 10/12 bolt C-clip, small car pattern |
| Wheel bolt pattern | 5×4.75/5×5.00, 5 lug |
| Lug nuts | Not included |
| Minimum wheel diameter | 18.0 inch |
| Template | Q110P |
| Grade | Performance |
| Country of origin | US |
Vehicle fitment
It is made for GM 10/12 bolt small car pattern rear axles with C-clip flanges and a 5×4.75/5×5.00 wheel bolt pattern. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The hardware is supplied pre-assembled with the rotors, and the stainless braided hoses come with the calipers. Park brake cables are not included, so a cable set has to come from another source to complete the park brake. Check the wheel fit on template Q110P first. Try the park brake on a level surface in a safe area before the vehicle goes on public roads.
What’s included
The kit comprises the rotors, black 6-piston calipers, backing plates with park brake shoe assemblies, stainless braided hoses and stainless hardware.
Not included: park brake cables and lug nuts.















