Overview
The Baer Brakes 4262189R is a red rear Pro Plus brake system kit for Ford 9 inch rear axles with early big bearing housing ends and a 5×5.00 bolt pattern. A 6-piston fixed caliper in red clamps a 14.0 inch, 2-piece slotted and drilled rotor, while the backing plate doubles as a mount and houses a one-piece park brake shoe assembly.
The minimum wheel diameter is 18.0 inch, and the 14 inch rotor fits most 18 inch or larger wheels. Wheel fit varies by style, so use the Q082P template with the wheel you plan to run. The caliper is manufactured in Phoenix, Az.
Key features
- Red 6-piston fixed caliper with powder coated finish
- Pistons, abutments and noise clips are all stainless steel
- Staggered pistons help limit uneven pad wear
- Dual dust, weather and pressure seals on the caliper
- Forged or billet aluminum caliper parts, CNC machined in the US
- Slotted, drilled, zinc-plated 2-piece rotor with a billet aluminum hat
- Stainless NAS hardware is pre-assembled with each rotor
- Designed around the D0731 pad type
Park brake and hose care
The park brake shoes sit inside the backing plate, so they work separately from the hydraulic service brake. Over time the lining wears and the adjuster can drift, which makes the lever travel longer. Checking the lever engagement during rear service keeps the parking function reliable when the vehicle is parked on a grade.
Braided hoses should be looked over at each pad change. Look for chafing where they pass near the suspension, bulging near the fittings, or seepage at the connections. Replace any hose that shows damage rather than trying to repair it, and bleed the system after any hose or caliper work.
- Look for chafing near suspension travel points
- Check fittings for seepage after each service
- Bleed the system after any hose or caliper change
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262189R |
| UPC | 844165037057 |
| Caliper | 6-piston (6P), fixed, red |
| Rotor outside diameter | 14.0 inch |
| Rotor thickness | 1.15 |
| Rotor type | 2-piece, vented |
| Rotor material | Iron with aluminum hat |
| Rotor surface | Slotted, drilled and zinc plated |
| Minimum wheel diameter | 18.0 inch |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×5.00 |
| Axle flange | Ford 9 inch early big bearing |
| Pad FMSI number | D0731 |
| Template | Q082P |
| Hose material | Steel braided, DOT approved |
| Grade | Performance |
| Park brake included | Yes |
| Park brake cables included | No |
| Front rotor included | No |
| Lug nuts included | No |
| Country of origin | US |
Vehicle fitment
No vehicles are named for this kit. Its fit is set by the axle: Ford 9 inch rear axles with early big bearing housing ends and a 5×5.00 bolt pattern. Match those measurements on your vehicle and confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan on buying park brake cables separately, since this kit leaves them out. Rotors come pre-assembled with stainless hardware. Use jack stands rated for the vehicle’s weight, because a jack alone is not safe support for brake work.
What’s included
The kit includes the red 6-piston caliper, the backing plate with its park brake shoe assembly, the 2-piece rotor with hardware, and braided hoses with hardware.
Not included: park brake cables, lug nuts and the front rotor.















