Overview
The Baer Brakes Pro Plus 13.0 Inch Brake System in silver, part number 4261216S, gives 1970 Ford and Mercury models a six-piston front disc setup. It is built for cars that keep their original drum brake spindle and fits the Ford Falcon, Fairlane, Torino, Maverick and Mustang plus the Mercury Comet, Cougar, Cyclone and Montego.
The package centers on a 13-inch rotor. It includes the front rotor, billet hubs, a silver fixed caliper and the mounting brackets and hardware needed to attach the assembly to the factory spindle. Lug nuts are not part of the package.
Key features
- Six-piston caliper in a silver powder coated finish
- Pistons, abutments and noise suppression clips are stainless steel
- Staggered pistons help limit uneven pad wear over time
- Vented two-piece rotor, slotted, drilled and zinc plated, with an aluminum hat
- Billet aluminum hubs with bearings packed with Redline synthetic grease
- Dual seals guard against dust, weather and pressure
- Stainless braided hoses rated DOT approved
- Pad type FMSI D0731
Before you buy
Swapping drum spindles for a disc setup changes more than the rotor. A front disc conversion changes how the brakes balance, so review the master cylinder, brake lines and proportioning arrangement before driving.
Wheel choice matters with a larger rotor. Measure clearance between the caliper and the inside of the wheel, and confirm the wheel’s offset and backspacing will clear the six-piston caliper. Tires should carry load ratings suited to the vehicle’s weight. Bleed the system after installation and check fluid level after the first few stops.
Routine care keeps a kit like this working. Check the hose fittings for weeping, look for scoring or heat marks on the rotor face, and re-torque the caliper bracket bolts after the first few drives. Billet hubs with sealed bearings still need periodic inspection for play and grease condition.
- Brake fluid and master cylinder compatibility
- Caliper and wheel clearance
- Bracket and hub bolt torque after first drives
- Pad wear inspection at each wheel service
- Hose condition and fitting leaks
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4261216S |
| UPC | 844165021360 |
| Caliper | 6-piston, 6P, fixed |
| Caliper color | Silver |
| Rotor outside diameter | 13.0 inch |
| Rotor construction | Two-piece, vented |
| Rotor style | Slotted, drilled, zinc plated |
| Rotor material | Iron with aluminum hat |
| Rotor thickness | 1.1 |
| Brake pad FMSI number | D0731 |
| Minimum wheel diameter | 17.0 inch |
| Wheel bolt pattern | 5 lug, 5×4.50 |
| Wheel stud size | 1/2-20 x 2.25 inch |
| Brake hose | Steel braided, DOT approved |
| Template | Q082H |
| Emission code | 6 |
| Grade type | Performance |
| Country of origin | US |
| Front rotor included | Yes |
| Lug nuts included | No |
Vehicle fitment
This silver 13-inch kit fits 1970 Ford Fairlane, 1970 Ford Falcon, 1970–1974 Ford Maverick, 1970–1973 Ford Mustang, 1970–1971 Ford Torino, 1971–1974 Mercury Comet, 1970–1973 Mercury Cougar, 1970 Mercury Cyclone and 1970–1971 Mercury Montego, each with drum brake spindles.
Mustangs and Cougars from 1974 and Torinos from 1972 onward are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The factory drum brake spindle must be present, since the kit is designed for that setup only. Lay the Q082H template against the intended wheel, because fit is not guaranteed for every wheel style. The 17-inch minimum wheel diameter is the first number to check.
What’s included
- Six-piston silver caliper
- Two-piece front rotor with stainless hardware
- Billet aluminum hubs with bearings
- Mounting brackets, stainless braided hoses and hardware
Not included: lug nuts.














