Overview
The Baer Brakes 4262097R is a red rear Extreme Plus brake system for Ford 9 inch rear ends fitted with Torino (late big) bearing housing ends. It combines a 1-piece monoblock 6S caliper, a 14.0 inch 2-piece slotted and drilled rotor, and a backing plate that also holds a park brake shoe assembly, so one kit covers both service and parking braking at the rear axle.
The kit is sold as a rear-axle set only, and the front rotor is not included. Baer assigns the Extreme Plus a Performance grade and manufactures the calipers in Phoenix, Az. Because the kit is matched to the axle housing rather than to a listed vehicle, the fitment details appear in their own section below.
Key features
- 1-piece monoblock, 6-piston, 6S caliper manufactured in Phoenix, Az
- CNC machined from a U.S.-sourced 2618 aluminum forging
- Powder coated finish in red
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons designed to minimize uneven pad wear
- Dual seals for dust, weather and pressure
- 2-piece slotted, drilled, zinc-plated rotor with billet aluminum hat, pre-assembled with NAS stainless hardware
- Backing plate integrates a modern 1-piece park brake shoe assembly
Pads and parking brake care
Rear brake kits like this one are often replaced as a complete package, but the pads, rotor surface and park brake shoes wear at different rates. Check pad thickness at each service and look for scoring or heat cracks on the rotor face. A slotted and drilled rotor can wear unevenly around the slots, so measure thickness across the face rather than at one point.
The park brake shoes sit in the backing plate and carry a different load than the service brake. Inspect them when the rear hub area is opened, and check that the adjuster moves freely. Keep grease off the friction surfaces.
Before reinstalling, bed in new pads with a series of moderate stops so an even layer of friction material transfers to the rotor. Torque the wheel lug nuts in a star pattern after the first few drives, since the wheel can settle against the hub face.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262097R |
| UPC | 844165035985 |
| Sold as | Kit |
| Axle | Rear |
| Axle flange | Ford 9 inch Torino / late big bearing |
| Caliper | 6S, 1-piece monoblock, fixed, 6 pistons |
| Caliper color | Red |
| Rotor outside diameter | 14.0 inch |
| Rotor construction | 2-piece, vented |
| Rotor material | Iron with aluminum hat |
| Rotor surface | Slotted, drilled and zinc plated |
| Rotor thickness | 1.25 |
| Pad type (FMSI) | D1247 |
| Hose material | Stainless steel |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Minimum wheel diameter | 18.0 inch |
| Includes park brake | Yes |
| Includes park brake cables | No |
| Template | N085P |
| Grade | Performance |
| Country of origin | US |
Vehicle fitment
It is built for the Ford 9 inch rear axle with Torino (late big) bearing housing ends and a five-lug 5×4.50/5×4.75 bolt pattern. Match your axle housing and wheel pattern before ordering.
This is the Torino housing version; early big bearing housings need a different kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Baer’s N085P template lets you compare the 14.0 inch rotor and caliper with your planned wheel before mounting, because the company cannot guarantee fit with every wheel style or manufacturer. The rotors arrive pre-assembled with NAS hardware. The park brake shoe assembly is built into the backing plate, but park brake cables are not included and must be sourced separately. Brake work is best left to a qualified technician who will bleed the system properly.
What’s included
The kit contains the red 6S monoblock caliper, the 2-piece rotor pre-assembled with NAS stainless hardware, the backing plate with park brake shoe assembly, and stainless braided hoses with hardware.
Not included: front rotor, park brake cables, and lug nuts.















