Overview
The 4262152R is a red 14.0 inch rear brake kit for Ford 9 inch rear ends with Torino (late big) bearing housing ends. Six-piston fixed calipers clamp two-piece slotted and drilled rotors, and the kit is built for a 5 lug wheel with a 5×4.50/5×4.75 bolt pattern. The grade is Performance, and the calipers are CNC machined from US-sourced forged or billet aluminum.
In this design the backing plate holds the caliper and also encloses a one-piece park brake shoe. Braided hoses and the mounting hardware are supplied, and Baer says wheels of 18 inches and up usually clear the kit without spacers.
Key features
- Six-piston fixed calipers in a red finish
- Staggered pistons aimed at reducing uneven pad wear
- Stainless pistons, abutments and noise suppression clips
- Dual seals against dust, weather and pressure
- Two-piece 14.0 inch rotor, slotted, drilled and zinc plated
- Billet aluminum rotor hat on a vented rotor
- Powder-coated caliper body
- Braided hoses, DOT approved
Pad and caliper service
Pad choice has a direct effect on rotor life and braking feel. Pads that match the rotor surface and the way the vehicle is driven tend to wear more evenly, while mismatched pads can glaze the rotor. Have the installer bed in new pads with a gentle first set of stops.
Red calipers need the same routine inspection as any caliper. Look for fluid around the piston seal, a sticking slide pin, or a pad that wears faster on one side. Those signs point to a problem that should be fixed before the vehicle is driven hard on grades or towing. Rear brake work is best done with the wheel removed and the result checked on a stand.
- Replace worn pads in pairs on each axle
- Check the parking shoe adjustment after the first few stops
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262152R |
| UPC | 844165036371 |
| Color | Red caliper |
| Caliper type | Fixed, six-piston (6P) |
| Pistons per caliper | 6 |
| Pad FMSI number | D0731 |
| Rotor outside diameter | 14.0 inch |
| Rotor thickness | 1.15 inch |
| Rotor type | Two-piece, vented |
| Rotor surface | Slotted, drilled and zinc plated |
| Rotor material | Iron with aluminum hat |
| Bolt pattern | 5×4.50/5×4.75 |
| Lug count | 5 lug |
| Minimum wheel diameter | 18.0 inch |
| Axle flange | Ford 9 inch Torino/Late Big bearing |
| Brake hose | Steel braided, DOT approved |
| Park brake | Included, cables not included |
| Template | Q082P |
| Grade | Performance |
| Sold as | Kit |
| Country of origin | US |
Vehicle fitment
Fitment is tied to the axle: Ford 9 inch rear ends with Torino (late big) bearing housing ends, 5 lug, and a 5 on 4.50 or 5 on 4.75 inch bolt pattern. Confirm your vehicle’s year, model and trim before ordering. Axles without Torino bearing housing ends do not match this kit’s flange.
Confirm your vehicle’s year, model and trim before ordering. Axles lacking Torino bearing housing ends do not match the flange named for this kit.
Installation notes
Before committing to a build, dry-fit the rotor and caliper against your planned wheel using Baer’s Q082P template, because Baer cannot promise a match for every wheel style. Park brake cables are not supplied, so plan your park brake hardware before assembly. The hydraulic work should go to a qualified installer who bleeds the lines fully before the vehicle is driven.
What’s included
The box holds the rear Pro Plus system: six-piston calipers, two-piece 14.0 inch rotors with billet aluminum hats, the park brake shoe enclosed by the backing plate, braided hoses and mounting hardware.
Not included: the front rotor, the park brake cables and the lug nuts all have to be obtained separately.















