Overview
The 4262255R is a 13 inch rear disc brake system for Ford 8 inch and 9 inch rear ends with small bearing housing ends. Its S4 4-piston caliper is red, and the 2-piece rotor carries a billet aluminum hat. It fits 5 lug wheels on 5 x 4.50 and 5 x 4.75 inch bolt circles.
The rotor is drilled and slotted with a zinc plated surface, and the rotor parts come pre-assembled with stainless hardware. A park brake shoe is built into the backing plate, which also serves as the caliper mount. Stainless braided hoses and hardware are included, and the minimum wheel diameter is 17.0 inch.
Key features
- 13.0 inch outside diameter, 2-piece rotor, 0.81 inch thick, with billet aluminum hat
- S4 caliper with 4 pistons and hard anodized aluminum pistons
- Fixed-type rear caliper
- Dual seals for dust, weather and pressure
- DR1-C pad type (FMSI DR1-C)
- Park brake shoe assembly built into the backing plate
- DOT approved stainless braided hoses
- Powder coated finish, CNC machined from US sourced forged or billet aluminum
Brake fluid and hose care
Braided stainless hoses resist swelling better than rubber lines, yet the fittings and crimps still need inspection. Check for chafing where a hose passes near the axle or spring perch, and make sure it has slack through full suspension travel without kinks. A soft pedal after hose work can mean trapped air, so bleed the system completely.
Brake fluid absorbs moisture over time, which lowers its boiling point and can lead to fade on long descents. Replace fluid on a regular schedule and draw it from a sealed container. When the caliper is serviced, inspect the dust seals and piston bore for scoring or corrosion before reassembly.
- Check hose fittings for seepage
- Keep hoses away from exhaust heat
- Replace fluid on the service interval
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262255R |
| UPC | 844165027980 |
| Caliper | S4, 4-piston, fixed, red |
| Rotor | 13.0 inch outside diameter, 2-piece, vented, slotted and drilled, zinc plated, billet aluminum hat |
| Rotor thickness | 0.81 inch |
| Rotor material | Iron with aluminum hat |
| Bolt pattern | 5 x 4.50 / 5 x 4.75 inch, 5 lug |
| Axle flange | Ford 8 inch and 9 inch small bearing |
| Minimum wheel diameter | 17.0 inch |
| Brake pad | DR1-C (FMSI) |
| Hoses | Braided, DOT approved |
| Park brake | Shoe assembly included; cables not included |
| Template | S135H |
| Country of origin | US |
Vehicle fitment
It is built for Ford 8 inch and 9 inch rear ends with small bearing housing ends. Confirm the axle flange type and your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the S135H template against your wheel before mounting, since this system requires a 17 inch or larger wheel. The rotor hardware arrives pre-assembled. A working park brake needs its own cable set, because the cables are excluded from the package.
What’s included
The kit includes the S4 caliper, 13 inch rotor, backing plate with park brake shoe, and stainless braided hoses with hardware.
Not included: the park brake cable set and the lug nuts for the 5 lug pattern.















