Select your vehicle

Baer Brakes Pro Plus 13.0 Inch Brake System Front 70-73 Ford Mustang 70 Fairlane 70 Falcon 70-74 Maverick 70-71 Torino And 70-73 Mercury Cougar 71-74 Comet 70-71 Montego 70 Cyclone W/OE Drum Brake Spindle Red – 4261216R

Baer Brakes

$2,698.95In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 19, 2026 3:20 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits Ford Falcon, Fairlane, Torino, Maverick, Mustang and Mercury Comet, Cougar, Cyclone and Montego with OE drum brake spindles
  • 13.0 inch vented two-piece rotor with zinc plated, slotted and drilled face
  • Six-piston red fixed caliper, FMSI D0731 pads
  • Includes front rotor, mounting brackets and stainless braided hoses
  • Part number 4261216R; lug nuts not included

Description

Overview

The Baer Brakes Pro Plus 13.0 Inch Brake System in red, part number 4261216R, is a six-piston front disc brake kit for Ford and Mercury cars from 1970 to 1974 that use drum brake spindles. It fits the Mercury Comet and Cougar, the Ford Falcon, Fairlane, Torino and Maverick, and the Ford Mustang and Mercury Cyclone and Montego.

Red is the caliper color, and the kit carries the front rotor. The assembly is designed to mount on the existing factory spindle, with billet aluminum hubs and a 13-inch rotor for the wheel. Lug nuts are not part of the kit.

Key features

  • Six-piston fixed caliper with a powder coated red finish
  • Clips for noise suppression, plus stainless pistons and abutments
  • Pistons are staggered to help even out pad wear
  • Two-piece rotor with an iron body and aluminum hat
  • Billet aluminum hubs, bearings packed with Redline synthetic grease, billet dust caps
  • Dust, weather and pressure seals on the caliper
  • Steel braided hoses, DOT approved
  • Pads listed under FMSI D0731

Caliper finish and upkeep

A powder coated caliper holds its color well when it is kept clean, but road salt, brake dust and high heat can dull the finish over time. Rinse the caliper after wet or winter driving and avoid harsh solvents on the coating, since a damaged finish can start to flake at the edges where heat cycles most. The finish has no effect on the caliper’s clamping action, so color is a matter of appearance only.

Upkeep matters more for the hardware underneath. Check the caliper slide pins and boots during brake service, clean out debris from the pad area, and make sure the pads move freely in the bracket. Two-piece rotors can develop uneven wear at the friction face, so look for scoring, a lip at the edge or a pulse in the pedal, and have the rotor measured before reusing it.

  • Rinse after wet or salted roads
  • Use a gentle cleaner on the coating
  • Inspect pins and boots at each brake service

Specifications

Brand Baer Brakes
Part number 4261216R
UPC 844165021346
Caliper 6-piston, 6P, fixed
Caliper color Red
Rotor outside diameter 13.0 inch
Rotor construction Two-piece, vented
Rotor style Slotted, drilled, zinc plated
Rotor material Iron with aluminum hat
Rotor thickness 1.1
Brake pad FMSI number D0731
Minimum wheel diameter 17.0 inch
Wheel bolt pattern 5 lug, 5×4.50
Wheel stud size 1/2-20 x 2.25 inch
Brake hose Steel braided, DOT approved
Template Q082H
Emission code 6
Grade type Performance
Country of origin US
Front rotor included Yes
Lug nuts included No

Vehicle fitment

It fits 1970 Ford Fairlane, 1970 Ford Falcon, 1970–1974 Ford Maverick, 1970–1973 Ford Mustang, 1970–1971 Ford Torino, 1971–1974 Mercury Comet, 1970–1973 Mercury Cougar, 1970 Mercury Cyclone and 1970–1971 Mercury Montego, all with drum brake spindles.

Mustang and Cougar years after 1973, Torino years after 1971 and Comet years before 1971 are outside this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

This kit depends on the factory drum brake spindle, so verify the spindle before any hub work starts. Hold the Q082H template against your wheel, since Baer cannot promise wheel clearance for every design. Brake hoses and calipers should be checked by a qualified technician once mounted.

What’s included

  • Red six-piston caliper
  • Front rotor, two-piece, pre-assembled with stainless hardware
  • Billet aluminum hubs with bearings
  • Mounting brackets and stainless braided hoses

Not included: lug nuts.

Specification

Shipping weight 69 lbs
Package dimensions 15.5 × 12.25 × 15.5 in
brands

Sold as

Kit

Wheel bolt pattern (in)

5×4.50

Lug nuts

5 Lug

Rotor type

2-Piece

Rotor style

Slotted, Drilled

Rotor construction

2-Piece

Rotor material

Iron w/Aluminum Hat

Front rotor included

Yes

Lug nuts included

No

Country of origin

US

Fitment

VehicleYearsTrims
Ford Fairlane1970All
Ford Falcon1970All
Ford Maverick1970–1974All
Ford Mustang1970–1973All
Ford Torino1970–1971All
Mercury Comet1971–1974All
Mercury Cougar1970–1973All
Mercury Cyclone1970All
Mercury Montego1970–1971All

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the 4261216R fit a 1971 Mercury Comet?

Yes, it fits 1971 to 1974 Mercury Comet with drum brake spindles. Confirm your year, model, trim and spindle type before installing, since the kit is designed for drum spindles rather than factory disc spindles.

Is the red caliper a fixed or floating design?

It is a fixed six-piston caliper, labeled 6P, with a red powder coated finish. The rotor is a vented two-piece unit, and the front rotor is included with the kit.

What wheel size does the 13-inch red kit require?

The minimum wheel diameter is 17.0 inches. The 13-inch Pro Plus is designed for most 17-inch or larger wheels, but fit is not guaranteed for every wheel style, so compare the Q082H template to your wheel.

What should be checked on a two-piece rotor during service?

Look for scoring, a raised lip at the friction edge, uneven wear and any pulse felt through the pedal. Confirm the hub and hat are tight and that the fasteners are torqued to the value in the installation guidance.

How should a powder coated caliper be cleaned?

Use a mild soap and water, or a wheel-safe cleaner, and rinse thoroughly. Avoid strong solvents, abrasive pads and high-pressure spray close to the seals, since these can damage the coating and boots.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon