Overview
Baer Brakes part 4261049R is a red Extreme front brake system for two-wheel-drive Ford F-150 trucks from 2004 through 2008. Its 1-piece Monoblock 6-piston 6S caliper sits on a 15-inch slotted, drilled rotor with zinc-plated surfaces, giving the front axle a matched set.
The 2WD configuration is the difference from the four-wheel-drive red kit, which is a separate part. Inside the package you get the caliper, rotor, mounting brackets and hardware, and the design uses the D1247 pad type. Baer’s guidance is that this 15-inch Extreme fits most wheels 19 inches or larger.
Key features
- 1-piece Monoblock 6-piston caliper, 6S, made in Phoenix, AZ
- 2618 aluminum forging is CNC machined in the U.S.
- Red powder coating
- Stainless steel internals: pistons, abutments and clips
- Staggered piston layout limits uneven pad wear
- Dual seals for dust, weather and pressure
- One-piece slotted and drilled rotor, zinc plated
- Factory hoses re-used
On the trail
Front brakes on a truck work hardest when the vehicle is loaded or descending a grade. Pads wear faster in these conditions, and rotors can develop heat cracks or a lip at the edge if they run hot for long periods. Checking pad thickness at every tire rotation makes it easier to catch these problems before the rotor is damaged.
Trail use also means water, mud and gravel reach the brake parts. After a deep water crossing, test the pedal in a safe area, since wet pads can grab less at first. Keeping the rotor surface clean and the caliper free of packed debris makes the system more predictable from one outing to the next. Check hoses for abrasion from rocks and branches.
- Check pad thickness at regular tire rotations
- Inspect hoses for chafing after rough trips
- Look for blue or grooved rotor faces
- Pair new pads with the matched rotor
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4261049R |
| UPC | 844165035060 |
| Sold as | Kit |
| Axle | Front |
| Drive | 2WD |
| Caliper | 6S, 1-piece Monoblock, 6-piston, fixed |
| Caliper color | Red |
| Rotor outside diameter | 15.0 inch |
| Rotor thickness | 1.18 |
| Rotor construction | 1-piece, vented |
| Rotor surface | Slotted, drilled and zinc plated |
| Rotor material | Iron |
| Front rotor included | Yes |
| Pad type (FMSI) | D1247 |
| Minimum wheel diameter | 19.0 inch |
| Lug count | 6 lug |
| Bolt pattern | 6x135mm |
| Template | N063U |
| Hose | Re-uses OE hoses |
| Emission code | 6 |
| Lug nuts included | No |
| Country of origin | US |
Vehicle fitment
Baer’s application for this kit is Ford F150 04-08 with Drive 2WD, so it covers two-wheel-drive 2004–2008 Ford F-150 trucks.
Four-wheel-drive trucks need the 4WD kit, and model years or Ford models beyond this application are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check wheel clearance before the kit goes in, since the minimum wheel diameter is 19.0 inch. Run the N063U template across the wheel to verify the match. Lug nuts are not supplied, so pick a 6-lug set for the 6x135mm bolt pattern. A competent brake technician should handle the hydraulic work and the bleed.
What’s included
The box has the red 6S Monoblock caliper, the front 15-inch rotor, mounting brackets and all related hardware.
Not included: Lug nuts.














