Overview
The Baer Brakes SS4 Plus 11.0 inch rear brake kit, part number 4262690S in silver, is designed for Ford 8 inch and 9 inch small bearing housing ends on a 5×4.5 or 5×4.75 bolt circle. It fits 1965–1973 Ford Mustang models, including Boss, Grande, Mach 1 and Shelby GT-350 and GT-500 variants.
Each kit combines a 4-piston S4 fixed caliper with an 11 inch 2-piece slotted, drilled rotor that is zinc plated and carries a billet aluminum hat. Brackets, steel braided hoses and hardware come with it, and the rotors are pre-assembled with stainless hardware. This kit does not include a park brake.
Key features
- 2-piece, 4-piston S4 caliper manufactured in Phoenix, AZ
- CNC machined from U.S.-sourced forged or billet aluminum
- Hard anodized aluminum pistons with stainless steel abutments
- Dual seals for dust, weather and pressure
- Powder coated silver finish
- 2-piece slotted, drilled, zinc-plated rotor with billet aluminum hat
- DOT approved steel braided hoses
Sizing the axle flange
Small bearing housing ends carry the wheel bearing and flange in a compact form, so the match between housing type and brake kit matters more than the caliper itself. Before ordering, measure the axle flange and confirm the bolt circle on the housing, then compare the rotor’s outside diameter with the wheel clearance you actually have.
Stainless hardware and braided hoses resist wear, but they still need inspection. Look for chafing where the hose passes near the suspension, and check the rotor face for heat cracks after the first hard stops. Pad material should match how the car is driven, since street pads and track pads wear at different rates and produce different noise.
- Confirm axle housing type before buying
- Check wheel clearance over the caliper
- Replace hoses showing any cracking
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262690S |
| UPC | 844165048008 |
| Sold as | Kit |
| Axle | Rear |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Axle flange | Ford 8 inch/9 inch small bearing |
| Required axle flange diameter | 5.75 inch |
| Caliper | S4, 4-piston |
| Caliper type | Fixed |
| Caliper color | Silver |
| Rotor outside diameter | 11.0 inch |
| Rotor thickness | 1.020 inch |
| Rotor type | 2-piece |
| Rotor construction | Vented |
| Rotor material | Iron with aluminum hat |
| Rotor surface | Slotted, drilled, zinc plated |
| Minimum wheel diameter | 15.0 inch |
| Pad FMSI number | DR1-C |
| Template | S125A |
| Hose material | Steel braided |
| Brake hose DOT approved | Yes |
| Park brake included | No |
| Grade | Performance |
| Country of origin | US |
Vehicle fitment
Manufacturer fitment data covers 1965–1973 Ford Mustang models only, with the Boss 302, Boss 351, Boss 429, Grande, Mach 1, Shelby GT-350, GT-350H, GT-500 and GT-500KR variants named.
Mustang years outside the 1965–1973 range and non-Mustang Ford models are not on this list. Check the 5.75 inch axle flange requirement against your housing before choosing this kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match the housing type first: this kit is built for small bearing 8 and 9 inch housing ends, so big bearing housings need a different kit. The braided hoses and brackets come in the box, which removes the need for custom line fabrication. Rear brake work changes how the car stops, so have the finished installation checked before driving.
What’s included
Included: the S4 caliper, mounting brackets, steel braided brake hoses, the 11.0 inch two-piece rotor pre-assembled with stainless hardware, and the mounting hardware.
Not included: lug nuts and a park brake.















