Overview
The Baer Brakes 4302332B is a rear disc brake system kit for GM small pattern 10/12 bolt axles with bearing-on-axle housing ends. It pairs a 12 inch S4 4-piston caliper with a 1-piece slotted, drilled, zinc-plated rotor, and it comes as a complete kit that includes a park brake.
The rear backing plate does two jobs. It mounts the caliper and houses a 1-piece park brake shoe assembly, so one housing covers service braking and parking duty. The axle flange is GM Small Pattern 10/12 Bolt Bearing on Axle, associated with Buick, Oldsmobile and Pontiac applications, and the wheel bolt pattern is 5×4.75/5×5.00. The 12 inch rotor fits most 16 inch or larger wheels. Clearance depends on the wheel design, so check the fit against the wheel before mounting.
Key features
- S4 4-piston caliper with hard anodized aluminum pistons, stainless steel abutments and noise suppression clips
- Dual seals for dust, weather and pressure
- Powder coated black caliper, CNC machined from US sourced forged or billet aluminum.
- 1-piece slotted, drilled, zinc-plated vented rotor
- 1-piece park brake shoe assembly housed in the backing plate
- Braided brake hoses included, DOT approved
- Pad type DR1 or HB100, with FMSI number DR1-C.
Service and parking duty
A rear disc brake housing does more than hold the caliper. With an integrated park brake shoe assembly, the backing plate carries the parking function alongside service braking, so the friction surfaces and shoe contact points deserve a look during any brake job. Rear brakes usually handle a smaller share of stopping force than the front, which makes them a good place to confirm that parking hold still works as expected.
A slotted and drilled rotor sheds gas and water differently from a plain one, but it also wears pads at a different pace, so pad choice matters. Bearing-on-axle housing ends carry wheel load through the axle, which makes correct axle bolt torque and a clean hub face important at each service. Check for runout and scoring whenever the rotor is off the vehicle.
- Inspect the park brake shoe linings whenever the rear caliper is off
- Clean the hub face before mounting the rotor
- Re-check wheel bolt torque after the first few drives
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4302332B |
| UPC | 844165028673 |
| Caliper | S4, 4-piston, fixed, black |
| Rotor outside diameter | 12.0 inch |
| Rotor type | 1-piece, vented, slotted and drilled |
| Rotor material | Iron |
| Rotor thickness | 1.02 |
| Rotor finish | Zinc plated |
| Axle | Rear |
| Axle flange | GM Small Pattern 10/12 Bolt Bearing on Axle |
| Wheel bolt pattern | 5×4.75/5×5.00 |
| Lug count | 5 lug |
| Minimum wheel diameter | 16.0 inch |
| Pad FMSI number | DR1-C |
| Park brake | Included; cables not included |
| Brake hose | DOT approved, braided |
| Country of origin | US |
| Sold as | Kit |
Vehicle fitment
The axle flange is GM Small Pattern 10/12 Bolt Bearing on Axle, associated with Buick, Oldsmobile and Pontiac applications. Confirm fit for your vehicle’s year, model and trim before ordering.
The flange name is the only axle reference given, so it does not confirm a specific model or year. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Baer recommends using its S113E template to compare the caliper and rotor against the wheel you plan to run before mounting. The park brake shoe assembly sits inside the backing plate, but the park brake cables are not part of the kit and must be sourced separately. Check wheel clearance with the template before the rotor and caliper are fitted, and test the brakes at low speed before driving on public roads.
What’s included
This kit includes the S4 caliper, 1-piece rotor, backing plate with park brake shoe assembly and braided brake hoses.
Not included: park brake cables, lug nuts and front rotor.















