Overview
The Baer Brakes 4261050R is a red-finished front Extreme brake system built for 4WD Ford F-150 trucks from 2004 through 2008. A 1-piece Monoblock 6-piston 6S caliper works with a 15-inch, 1-piece slotted, drilled, zinc-plated rotor, so the front brakes arrive as one matched kit.
The kit brings the caliper, rotor, mounting brackets and hardware together in one package. It uses the D1247 pad type and keeps the factory hoses, so the front plumbing stays original. The 15-inch Extreme is intended for wheels 19 inches and up.
Key features
- Monoblock 6-piston caliper with 1-piece design, model 6S
- CNC machined from U.S.-sourced 2618 aluminum forging
- Powder-coated red finish
- Stainless construction for pistons, abutments and noise suppression clips
- Staggered pistons designed to minimize uneven pad wear
- Dual seals guard against dust, weather and pressure
- Slotted, drilled and zinc-plated 1-piece rotor
- Re-uses OE hoses
Before you buy
A front disc brake kit does most of its work under heavy braking, so pad and rotor condition matter as much as the caliper itself. When a rotor is worn below its minimum thickness or shows deep scoring, pedal feel and stopping distance suffer. Replacing the rotor and pads together keeps the friction surfaces matched and avoids the uneven wear that a new rotor can cause against old pads.
Wheel clearance is worth settling before purchase. Larger wheels often need more room around the caliper, and a change in offset can move the wheel closer to the brake body. Check the wheel’s back spacing against the caliper once the kit is laid out. Off-road use with larger tires adds load to the front brakes, so pads suited to that work are a sensible companion to any upgrade.
- Inspect hoses for cracks or swelling at every pad change
- Bed in new pads gradually before heavy use
- Replace brake fluid on a regular service schedule
- Check lug nut torque after the first few drives
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4261050R |
| UPC | 844165013037 |
| Sold as | Kit |
| Axle | Front |
| Drive | 4WD |
| Caliper | 6S, 1-piece Monoblock, 6-piston, fixed |
| Caliper color | Red |
| Rotor outside diameter | 15.0 inch |
| Rotor thickness | 1.18 |
| Rotor construction | 1-piece, vented |
| Rotor surface | Slotted, drilled and zinc plated |
| Rotor material | Iron |
| Front rotor included | Yes |
| Pad type (FMSI) | D1247 |
| Minimum wheel diameter | 19.0 inch |
| Lug count | 6 lug |
| Bolt pattern | 6x135mm |
| Template | N063U |
| Hose | Re-uses OE hoses |
| Emission code | 6 |
| Lug nuts included | No |
| Country of origin | US |
Vehicle fitment
Baer’s application for this kit is Ford F150 04-08 with Drive 4WD, so it covers the 2004–2008 Ford F-150 four-wheel-drive trucks.
Two-wheel-drive F-150 trucks are covered by the separate 2WD kit, and other Ford models or model years outside this range are not covered here. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan on supplying lug nuts, since none come with the kit, and match them to the 6x135mm bolt pattern with 6 lugs. Because wheel fit is the variable Baer warns about, check the N063U template against the wheel you intend to run before anything is bolted on. Ask a shop used to disc brake hydraulics to handle pad seating and the bleed, since air trapped in the lines can compromise braking.
What’s included
The package contains the red 6S Monoblock caliper, the front 15-inch rotor, all mounting brackets and the hardware that comes with them.
Not included: Lug nuts.














