Overview
The Baer Brakes 4262193B is a rear Pro Plus brake system kit for Ford 9 inch rear axles with Torino (late big) bearing housing ends and a 5×5.00 wheel bolt pattern. It pairs a black 6-piston fixed caliper with a 13.0 inch, 2-piece slotted and drilled rotor. The backing plate also holds a one-piece park brake shoe assembly, so the kit covers service braking and parking at the rear.
Baer sets the minimum wheel diameter at 17.0 inch and suits the 13 inch rotor to most 17 inch or larger wheels. Fit with every wheel style is not guaranteed, so compare the Q082H template against your chosen wheel before ordering. The caliper is manufactured in Phoenix, Arizona.
Key features
- Black 6-piston fixed caliper with a powder coated finish
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons intended to reduce uneven pad wear
- Dual seals covering dust, weather and pressure
- Caliper components are CNC machined from US-sourced forged or billet aluminum
- 2-piece rotor is slotted, drilled and zinc plated, with a billet aluminum hat
- Rotors come pre-assembled with NAS high grade stainless hardware
- Uses the D0731 brake pad type
Choosing the right setup
Rear brake upgrades are easiest to plan when the axle is identified first. Measure the axle flange and count the lugs before comparing kits, because a bearing style or bolt pattern that is close but not identical will not seat correctly. Wheel clearance matters as well. A 13 inch rotor leaves less room inside the spokes than a larger rotor, so the wheel’s backspacing and inner barrel depth should be checked against the caliper body.
A park brake shoe assembly carried in the backing plate means the rear kit covers both service and parking braking. Shoes, springs and adjusters in that assembly wear over time, so they are worth inspecting whenever the drums or rotors are serviced. Keep the rest of the rear hardware in mind too, including the axle bearings, wheel studs and any brake lines that may need to be re-routed when the calipers change.
- Confirm axle flange style and bolt pattern first
- Check wheel clearance against the caliper before mounting
- Plan for park brake cables and lug nuts separately
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262193B |
| UPC | 844165037118 |
| Caliper | 6-piston (6P), fixed, black |
| Rotor outside diameter | 13.0 inch |
| Rotor thickness | 1.1 |
| Rotor type | 2-piece, vented |
| Rotor material | Iron with aluminum hat |
| Rotor surface | Slotted, drilled and zinc plated |
| Minimum wheel diameter | 17.0 inch |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×5.00 |
| Axle flange | Ford 9 inch Torino (late big) bearing |
| Pad FMSI number | D0731 |
| Template | Q082H |
| Hose material | Steel braided, DOT approved |
| Grade | Performance |
| Park brake included | Yes |
| Park brake cables included | No |
| Front rotor included | No |
| Lug nuts included | No |
| Country of origin | US |
Vehicle fitment
This kit is sized for Ford 9 inch rear axles with Torino (late big) bearing housing ends. Match your axle flange and 5×5.00 bolt pattern to the kit, and confirm fit for your vehicle’s year, model and trim before ordering. Check the Q082H template before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Park brake cables are not included, so budget for them separately. Rotors arrive pre-assembled with their stainless hardware. Support the rear of the vehicle on jack stands before removing any wheel.
What’s included
The kit includes the black 6-piston caliper, the backing plate with its one-piece park brake shoe assembly, the 2-piece rotor with stainless hardware, and braided hoses with hardware.
Not included: park brake cables, lug nuts and the front rotor.















