Overview
The Baer Brakes 4262261S is an SS4 rear brake system kit for Ford 9 inch early big bearing housing ends with a 5×5.00 inch bolt pattern. It pairs a silver S4 four-piston fixed caliper with a 12.0 inch one-piece slotted and drilled rotor, sold as a kit for the rear axle.
The Baer backing plate serves as the caliper mount and also houses a one-piece park brake shoe assembly, so the kit covers the park brake as well as the service brake. The system is Performance grade, and its components are CNC machined from US-sourced forged or billet aluminum.
Key features
- S4 four-piston caliper with hard anodized aluminum pistons
- Stainless steel abutments and noise suppression clips
- Dual seals for dust, weather and pressure
- Powder coated finish on CNC machined aluminum parts; S4 caliper manufactured in Phoenix, AZ
- 12.0 inch one-piece slotted, drilled and zinc plated rotor
- One-piece park brake shoe assembly built into the backing plate
- Braided hoses, DOT approved
Park brake and service brake
On this style of rear kit the park brake lives inside the backing plate, so the parking function and the service brakes share a mounting point. Inspect the shoe assembly during every brake service, since shoe wear affects how well the parking brake holds on a grade. Cable routing and adjustment should be checked whenever the rear end is opened.
A silver caliper finish is largely cosmetic, but the powder coat still needs protection from road salt and heat. Rinse the caliper after winter driving and avoid abrasive pads on the coating. Keep the rotor surface free of grease, since oil on the friction surface reduces stopping power regardless of the caliper finish.
- Park brake shoe wear during service
- Cable routing and adjustment
- Caliper finish after salt exposure
- Rotor surface kept free of grease
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262261S |
| UPC | 844165028413 |
| Sold as | Kit |
| Axle | Rear |
| Axle flange | Ford 9 inch early big bearing |
| Bolt pattern | 5×5.00 inch (5 lug) |
| Caliper | S4, four-piston, fixed |
| Caliper color | Silver |
| Caliper finish | Powder coated |
| Rotor outside diameter | 12.0 inch |
| Rotor type | 1-piece |
| Rotor style | Slotted, drilled |
| Rotor construction | Vented |
| Rotor material | Iron |
| Rotor surface | Zinc plated |
| Pad type | DR1 or HB100 (FMSI DR1-C) |
| Minimum wheel diameter | 16.0 inch |
| Park brake | Included, one-piece shoe assembly |
| Brake hoses | Braided, DOT approved |
| Grade | Performance |
| Template | S113E |
| Country of origin | US |
Vehicle fitment
It is built around the Ford 9 inch early big bearing axle housing ends, an axle flange type rather than a specific year, make, model or trim. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Wheel fit should be checked against the S113E template because wheel styles vary. Park brake cables are not included, so they must be sourced separately if your installation uses them.
What’s included
The kit includes the rear S4 four-piston caliper, the 12.0 inch one-piece slotted and drilled rotor, the backing plate with the one-piece park brake shoe assembly, and braided hoses.
Not included: front rotor, lug nuts, park brake cables.















