Overview
The Baer Brakes 4262149B is a black Pro Plus 13.0 inch rear brake kit for the Ford 9 inch rear end with Torino (late big) bearing housing ends. Its 6P caliper is a 6-piston fixed design that clamps a 13.0 inch two-piece rotor, and the hub side is drilled for a 5×4.50 or 5×4.75 bolt circle.
Baer designed the backing plate to carry the caliper and house a one-piece park brake shoe assembly. The rotor hat is billet aluminum, and the rotor ships pre-assembled with stainless hardware. Because wheel styles vary so widely, Baer will not promise fitment into every wheel; the Q082H template lets you test clearance against the wheel you have in mind, and the minimum wheel size is 17 inch.
Key features
- 6-piston, 6P fixed caliper finished in black
- Zinc plated, slotted and drilled two-piece rotor at 13.0 inch
- Billet aluminum rotor hat
- Abutments and noise suppression clips paired with stainless pistons
- Staggered piston layout to reduce uneven pad wear
- Seals rated against dust, weather and pressure
- Powder coated finish
- Braided hoses and stainless hardware supplied with the kit
Before you install
Installing a 13 inch rear rotor kit changes how the axle handles braking loads, so the work is best planned around the whole rear end rather than one wheel at a time. Confirm the bearing housing type and the hub pattern before opening any boxes, then lay out the caliper, backing plate, hoses and hardware to check against the installation steps.
Park brake function depends on the shoe in the backing plate and on cables that are not part of this kit. Source cables and lug nuts before work starts so the vehicle is not left without a parking hold. Keep the work area clean so debris does not reach the rotor or pad faces. After assembly, test the brake at low speed and recheck fasteners after the first short drives.
- Gather park brake cables before starting
- Match lug nuts to the 5-lug hub
- Bed in new pads gradually
- Keep a torque wrench on hand for wheel work
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262149B |
| UPC | 844165021919 |
| Caliper | 6-piston (6P), fixed, black |
| Rotor diameter | 13.0 inch |
| Rotor type | 2-piece, slotted, drilled, zinc plated |
| Rotor material | Iron with aluminum hat |
| Rotor thickness | 1.1 |
| Pad type (FMSI) | D0731 |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Lug count | 5 lug |
| Minimum wheel diameter | 17.0 inch |
| Axle flange | Ford 9 inch Torino/Late Big bearing |
| Brake hose | Steel braided, DOT approved |
| Park brake | Included |
| Template | Q082H |
| Grade | Performance |
| Emission code | 6 |
| Country of origin | US |
Vehicle fitment
The fitment is the Ford 9 inch rear end with Torino (late big) bearing housing ends. Confirm fit for your vehicle’s year, model and trim before ordering.
Verify that the rear housing has Torino bearing ends and that the hub matches the bolt circle before you commit to this kit.
Installation notes
The park brake shoe assembly is housed in the backing plate, so check park brake operation once the system is assembled. Park brake cables must be supplied separately. Lug nuts are not supplied either, so match new nuts to the 5-lug pattern. Test brake function at low speed before returning the vehicle to normal driving.
What’s included
Included with the kit: the 6-piston caliper system, the pre-assembled 13.0 inch rotor with billet aluminum hat, the backing plate with its one-piece park brake shoe assembly, and braided hoses with hardware.
Not included: a front rotor, lug nuts and the park brake cables must be supplied separately.















