Overview
The Baer Brakes 4262259R is a red rear disc brake kit for Ford 9 Inch early big bearing housings. Its S4 4-piston caliper clamps a 12.0 inch, 1-piece slotted, drilled and zinc plated rotor, and a park brake shoe assembly sits inside the backing plate that also serves as the caliper mount.
The kit targets five-lug wheels on 5×4.50 or 5×4.75 bolt circles, with a 16.0 inch minimum wheel diameter. Pads follow the DR1 or HB100 family (FMSI DR1-C) and the rotor is vented. Drivers hunting a big bearing 9 inch rear brake setup with a built-in park brake can consider this red version for that job.
Key features
- Red S4 4-piston caliper machined from US sourced forged or billet aluminum.
- Powder coated finish on the caliper body.
- Hard anodized aluminum pistons and stainless steel abutments.
- Noise suppression clips plus dual dust, weather and pressure seals.
- Slotted, drilled, zinc plated 1-piece rotor at 12.0 inch.
- Park brake shoe assembly integrated into the backing plate.
- Stainless braided hoses included.
Heat and finish care
A red powder coated caliper handles normal braking heat well, but brake dust and road grime can stain the finish over time. Regular rinsing keeps the caliper body clean and makes it easier to spot leaks, cracked boots or loose fittings during routine checks.
Pad choice affects heat as much as the caliper does. Street-oriented compounds tend to offer quiet operation and steady cold bite, while firmer performance compounds usually run hotter and can leave more dust. Matching the compound to how the vehicle is driven helps the rear brakes stay consistent.
- Rinse the caliper and rotor face with plain water after muddy runs
- Look for fluid seepage around piston seals during inspection
- Avoid getting solvent on the caliper seals
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262259R |
| UPC | 844165028284 |
| Caliper color | Red |
| Caliper | S4, 4 pistons, fixed type |
| Rotor outside diameter | 12.0 inch |
| Rotor thickness | 1.02 |
| Rotor construction | 1-piece, vented |
| Rotor finish | Slotted, drilled, zinc plated |
| Minimum wheel diameter | 16.0 inch |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Lug count | 5 lug |
| Axle flange | Ford 9 Inch Early Big Bearing |
| Hose material | Steel braided |
| Pad FMSI number | DR1-C |
| Template | S113E |
| Park brake | Included |
| Grade | Performance |
| Country of origin | US |
Vehicle fitment
Fit is set by the Ford 9 Inch Early Big Bearing axle flange and the 5×4.50/5×4.75 bolt patterns. A wheel match across every style cannot be guaranteed, so check the S113E template against the wheel you plan to run.
Only the early big bearing flange is named, so other axle flange types are outside this kit’s listed fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Park brake cables are sold outside this kit, so plan for them separately. The park brake shoes ride in the backing plate, and stainless braided hoses come with the kit. After the hoses are connected the system will need bleeding, and a qualified shop should verify wheel clearance around the 12.0 inch rotor.
What’s included
The red S4 caliper, the backing plate with its park brake shoe assembly, the 12.0 inch rotor and stainless braided hoses make up the kit.
Not included: park brake cables are left out, and so are the front rotor and the lug nuts.















