Overview
The Baer Brakes 4262241S is an SS4 rear brake system kit for Ford 8.8 inch C-clip rear ends, with a 2.5 inch axle standoff and a 5 lug, 5×4.50 bolt pattern. It combines an S4 four-piston floating caliper in silver with a 12 inch one-piece slotted and drilled rotor and a built-in park brake, so it suits a rear axle that needs both performance braking and a parking brake function.
Baer’s backing plate does double duty: it mounts the caliper and houses a one-piece park brake shoe assembly. Braided hoses, approved to DOT standards, come with the kit. The 12 inch SS4 fits most 16 inch or larger wheels, but fit can vary by wheel style and maker, so compare the S113E template to your chosen wheel.
Key features
- S4 four-piston floating caliper in silver, manufactured in Phoenix, Arizona
- CNC machined from US-sourced forged or billet aluminum with a powder coated finish
- Hard anodized aluminum pistons with stainless steel abutments and noise suppression clips
- Dual seals for dust, weather and pressure
- 12 inch one-piece slotted, drilled and zinc-plated vented rotor
- One-piece park brake shoe assembly housed in the backing plate
- Braided brake hoses, DOT approved
Before you buy
A rear disc kit with an integrated park brake changes how the rear axle is serviced over time. The rotor, caliper and park brake shoes wear at different rates, and the park brake shoes sit inside the backing plate, so they are checked whenever the rotor comes off. Many owners who replace the rotor also refresh the pads and inspect the hydraulic hoses at the same time, since the work is already underway.
When choosing a setup, check caliper and rotor clearance against the chosen wheel, and consider whether the vehicle is used mainly on pavement or on trails. Heavier loads and frequent downhill driving put more heat into the rear brakes, which makes pad compound and rotor material more important. Matching the pad to the rotor and caliper keeps the system balanced under those conditions.
- Check caliper and rotor clearance against the chosen wheel
- Inspect braided hoses for chafing or bulges at each service
- Replace pads and rotor together when wear is uneven
- Confirm park brake cable availability before starting the job
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262241S |
| UPC | 844165028178 |
| Sold as | Kit |
| Caliper | S4, four-piston, floating |
| Caliper color | Silver |
| Rotor outside diameter | 12.0 inch |
| Rotor type | One-piece, slotted, drilled, zinc plated, vented |
| Rotor material | Iron |
| Rotor thickness | 1.02 |
| Pad type | DR1 or HB100; FMSI DR1-C |
| Axle flange | Ford 8.8 inch |
| Axle standoff | 2.5 inch |
| Lug count | 5 lug, 5×4.50 bolt pattern |
| Minimum wheel diameter | 16.0 inch |
| Park brake | Included; park brake cables not included |
| Brake hose | Braided, DOT approved |
| Template | S113E |
| Grade | Performance |
| Emission code | 6 |
| Country of origin | US |
Vehicle fitment
The kit is built around the Ford 8.8 inch C-clip axle flange and a 2.5 inch axle standoff, so confirm your axle type first. Wheel clearance is a separate check: it fits most 16 inch or larger wheels, so compare the S113E template with the wheel you plan to run.
Installation notes
Park brake cables are not included, so a cable set must be obtained separately to connect the park brake. The braided hoses come with the kit, and the park brake shoe sits inside the backing plate, so no separate park brake plate is needed. Because the work involves rear brake hydraulics and the parking brake, have it performed by a technician who can bleed the system and set the park brake, and support the vehicle on stands rather than a jack alone.
What’s included
The kit includes the S4 caliper, a 12 inch one-piece slotted and drilled rotor, the backing plate with its one-piece park brake shoe assembly, braided hoses, and a 2.5 inch axle standoff.
Not included: park brake cables, lug nuts and a front rotor.















