Overview
Baer Brakes offers the Extreme Plus rear brake package in black under part number 4262096B, designed for Ford 9 inch rear axles with early big bearing housing ends. The kit suits 5 on 4.50 and 5 on 4.75 wheel bolt patterns and combines a 6-piston Monoblock caliper with a 14.0 inch two-piece rotor.
The axle housing type is the only fitment reference for this kit. The caliper is manufactured in Phoenix, Arizona, and the package comes as a kit with stainless braided hoses.
Key features
- Monoblock 6-piston caliper in the 6S design, machined from US-sourced 2618 aluminum forging
- Powder coated finish on the caliper body
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons help minimize uneven pad wear
- Dual seals guard against dust, weather and pressure
- Two-piece slotted, drilled, zinc-plated rotor with billet aluminum hat
- Rotors arrive pre-assembled with NAS high grade stainless hardware
- Stainless braided hoses with hardware included
Parking brake function
The park brake shoe built into the backing plate works separately from the hydraulic service brakes. Its holding strength depends on the cable run from the lever, the adjustment at the shoes, and the condition of the linings. A cable that binds or a shoe that is out of adjustment can leave the parking brake weak even when the service brakes are fine.
Route the cables away from heat sources and moving suspension parts, and check the cable ends for corrosion at each service. Adjust the shoes with the wheels off, then confirm the lever engages at a consistent point. Recheck the adjustment after the first few drives, since new linings settle.
When cables are sourced separately, match them carefully to the lever and backing plate routing, as a wrong length will limit how far the brake can be set. Test the parking brake on a slight grade in a safe area before relying on it.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262096B |
| UPC | 844165035916 |
| Caliper | Monoblock, 6 pistons, 6S, fixed |
| Caliper color | Black |
| Rotor outside diameter | 14.0 inch |
| Rotor thickness | 1.25 |
| Rotor type | 2-piece, vented |
| Rotor material | Iron with aluminum hat |
| Rotor surface | Slotted, drilled and zinc plated |
| Brake pad FMSI number | D1247 |
| Template | N085P |
| Wheel bolt pattern | 5×4.50/5×4.75 in |
| Lug count | 5 |
| Minimum wheel diameter | 18.0 inch |
| Axle | Rear, Ford 9 inch early big bearing flange |
| Hose material | Stainless steel |
| Includes park brake | Yes |
| Emission code | 6 |
| Country of origin | US |
| Supplied as | Kit |
Vehicle fitment
This black kit is for Ford 9 inch early big bearing rear axle housing ends, an axle type rather than a make, model or year. Verify your axle housing and vehicle details before buying.
Wheel style fit varies, so compare the N085P template to your wheel before buying. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The park brake shoe assembly sits in the backing plate, so this is a full rear system rather than a simple caliper bolt-on. Park brake cables must be planned for separately, and wheel clearance should be checked against the 18.0 inch minimum wheel diameter using template N085P. Rear brake work is best left to a technician who can handle the backing plate mounting.
What’s included
Supplied with the kit are the 6S Monoblock caliper, the 14.0 inch rotor pre-assembled with stainless hardware, the backing plate carrying the park brake shoe assembly, and stainless braided hoses with their hardware.
Not included: lug nuts, park brake cables and a front rotor.















