Overview
The Baer Brakes 6920992 is a right-side, 13.000 inch replacement brake rotor in a tall hat design, with a .810 inch thickness and a 5 x 4.75 inch bolt circle. The overall height is 2.235, and the center bore is 2.780 inch.
It is a one-piece, vented cast iron rotor with a slotted, drilled and zinc-plated surface. It is not a drum-in-hat rotor, so it has no integrated drum. It is a directional performance part built for one side of the vehicle.
Key features
- Tall hat construction, as identified in the product name.
- Slotted and drilled friction face with a zinc-plated finish.
- Curved vane pattern intended for cooling.
- It is dynamically balanced for vibration-free performance.
- Full cast, one-piece cast iron body.
- Directional design built for the right side.
Before you buy
A tall hat rotor moves the friction face outward from the hub, which changes how the caliper and bracket sit over the rotor. Before buying one, compare the caliper bracket, pad fit and wheel clearance against your current setup, since a taller hat can reduce room between the rotor and the wheel spokes. Brake pads are often replaced at the same time, because a new rotor needs pads that bed in well against its surface.
Slotted and drilled faces help shed gas and debris, but they can also wear pads faster and show cracking under heavy use, so this style suits drivers who want a firmer pedal feel. Zinc plating protects the surface only until the friction face is cut in, so check the hat and mounting surfaces for rust during tire rotations.
- Check for cracks around slots and drill holes
- Inspect the hat and mounting face for rust or pitting
- Replace hub bearings if they show play or wear
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920992 |
| UPC | 844165037835 |
| Package quantity | Each |
| Country of origin | USA |
| Axle side | Right |
| Outside diameter | 13.000 inch |
| Nominal thickness | .810 inch |
| Overall height | 2.235 |
| Center hole diameter | 2.780 inch |
| Bolt circle diameter | 4.75 inch |
| Lug hole quantity | 5 |
| Hat style | Tall hat |
| Material | Cast iron |
| Construction | Full cast, one piece |
| Rotor type | Vented |
| Brake surface | Directional |
| Surface type | Slotted, drilled and zinc plated |
| Drum in hat | No |
| Grade type | Performance |
| Emission code | 6 |
| ABS tone ring included | No |
Vehicle fitment
Fitment is matched by hub measurements: a 13.000 inch diameter and a 5 x 4.75 inch bolt circle. Confirm fit for your vehicle’s year, model and trim before ordering.
Caliper clearance and hub fit depend on the vehicle, so confirm both before installing. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because this rotor is directional, the right-side part belongs on the right hub only. Check caliper and bracket clearance with the taller tall hat profile before fitting. Brake work should be left to a qualified technician.
What’s included
One right-side rotor, package quantity each.
Not included: a left-side rotor, which carries a separate part number.
