Overview
The Baer Brakes Claw Performance Rotors, part number 31328-020, are a front pair of cross-drilled and slotted replacement brake rotors for the 2004–2005 Nissan Titan, 2005 Nissan Armada and 2004–2005 Infiniti QX56.
Baer Claw rotors are direct replacements meant to improve braking performance and appearance. Each rotor has a slotted and drilled friction surface that lets gases and dust escape between the pad and rotor during braking, which Baer says gives a more consistent pedal feel and reduced brake fade. The one-piece full cast cast iron construction is vented, and the zinc-plated finish suits open-center wheels. The enhanced vane structure is intended for cooling and durability under repeated stops.
Key features
- Slotted and drilled friction surface lets gases and dust escape between the pad and rotor for improved braking and a more consistent pedal.
- Enhanced vane structure and premium materials for cooling and durability.
- Premium, mill balanced, direct replacement rotor.
- Chamfered cross-drilled holes to minimize stress cracking.
- Zinc-plated finish gives a bright appearance in open-center wheels.
- Sold as a set, a pair of front rotors.
Care after installation
Cross-drilled and slotted rotors can be more visible in use, so a simple inspection after each service helps catch problems early. Look at the friction face for cracking near the drilled holes, check for scoring from worn pads, and listen for grinding that signals pad material is gone. Keep the wheels and brake components clean so grit does not accelerate wear on the new surface.
Front rotors on large trucks and SUVs often work harder than they would on lighter vehicles, especially when towing or descending long grades. Using a lower gear on descents reduces heat load on the brakes. If the pedal pulses or the vehicle pulls under braking, have the rotors measured for runout and thickness before continuing to drive.
- Inspect the friction face for cracks near the holes
- Clean wheels and brake parts to limit grit wear
- Use a lower gear on long descents
- Have runout checked if the pedal pulses
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 31328-020 |
| UPC | 844165031147 |
| Sold as | Set |
| Axle | Front |
| Rotor construction | One-piece, full cast |
| Material | Cast iron |
| Solid or vented type | Vented |
| Surface type | Slotted and drilled |
| Brake surface | Directional |
| Disc finish | Zinc plated |
| Grade type | Premium |
| Stud/lug hole quantity | 6 |
| Mounting bolt hole circle diameter | 140 |
| Outside diameter | 320.04 |
| Overall height | 42.92 |
| Discard thickness | 24.6 |
| Emission code | 6 |
| ABS tone ring included | No |
| Country of origin | CN |
Vehicle fitment
Manufacturer fitment lists these front Baer Claw rotors for the 2004–2005 Nissan Titan (RWD and 4WD; 2004 through 02/05), the 2005 Nissan Armada (RWD, 4WD and AWD; through 02/05) and the 2004–2005 Infiniti QX56 (RWD and 4WD; 2004 through 03/05).
The list does not cover the Nissan Armada for 2004 or for 2006 and later, or Titan and QX56 model years outside 2004–2005. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit does not include an ABS tone ring, so check the ring on your vehicle before installing these rotors. Brake work changes stopping performance, so test the brakes at low speed before driving the vehicle normally.
What’s included
A pair of front Baer Claw performance rotors, sold as a set.
Not included: ABS tone ring.
