Overview
The Baer Brakes 6910219 is a 2-piece slotted replacement rotor ring for the left side of select Baer Brake systems. The ring measures 14.000 inch across, has a 1.150 inch nominal thickness, and carries twelve mounting bolt holes on an 8.50 inch bolt circle.
The ring is left-side, vented, directional and made from cast iron. Its slotted surface, curved vanes and dynamic balancing are designed to support cooling and steady running. Rotor rings are sold individually, and no vehicle is named for this part, so confirm compatibility before ordering.
Key features
- Two-piece construction in a rotor ring design.
- Slotted surface finish.
- Curved vane design for cooling.
- Twelve mounting bolt holes on an 8.50 inch bolt circle.
- Directional brake surface for the left side.
- Dynamic balanced for vibration-free performance.
- Cast iron, performance grade, emission code 6.
Before you install the ring
A two-piece rotor separates the friction ring from the hub, so the ring bolts to a carrier that stays on the hub. Because the friction ring and carrier are separate parts, the fit between them matters as much as the ring itself. Clean the mating surfaces and check for burrs or corrosion before the ring is fitted.
Pads and ring wear together, so inspect the pads when the ring is replaced. Keep the left ring separate from the right one during handling, and confirm the twelve-hole, 8.50 inch bolt circle lines up with the carrier before tightening. Use a torque wrench on the wheel fasteners and recheck them after the first few drives.
Look for cracks, grooving or heat marks on the friction surface as signs the ring is worn. Pulsation under braking or a rough feel at the pedal can point to a ring that has warped or worn unevenly.
- Clean the carrier and hub seats before fitting.
- Recheck bolt torque after the first few drives.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6910219 |
| UPC | 90127960998 |
| Construction | Two piece |
| Material | Cast iron |
| Surface finish | Slotted |
| Axle side | Left |
| Rotor type | Vented |
| Brake surface | Directional |
| Outside diameter | 14.000 inch |
| Nominal thickness | 1.150 inch |
| Mounting bolt hole quantity | 12 |
| Mounting bolt hole circle diameter | 8.50 inch |
| Grade type | Performance |
| Emission code | 6 |
| ABS tone ring included | No |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
No vehicle is named for this ring. It is made for select Baer Brake systems and is a left-side part with a 12-hole, 8.50 inch bolt circle. Confirm your vehicle’s Baer system, left-side axle and bolt pattern before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Two-piece rotor rings need the ring checked against the hub and its mounting pattern before fitting, so keep the left ring separate from the right one. Check the twelve-hole, 8.50 inch bolt circle first. Inspect the ring for damage before the wheel goes back on.
What’s included
One left-side, 2-piece slotted replacement rotor ring, sold as each.
Not included: the right-side ring.
