Overview
The Baer Brakes 6919089 is a left-side, 12 inch, 1-piece plain finish replacement brake rotor made for select Baer Brake systems. It is a vented cast iron rotor with a drum in hat feature, sold as a single rotor for the left side of the vehicle.
The casting is purpose built from premium materials, with a curved vane design and dynamic balancing for smooth running. Because the rotor is directional, it is made for one side only, so the left and right rotors are separate parts. Confirm the application for your vehicle before buying.
Key features
- Full cast, one-piece construction in cast iron
- Vented rotor with curved vanes that Baer says improve cooling
- Directional braking surface built for the left side
- Dynamic balanced to reduce vibration
- Plain friction surface with no slots or drilled holes
- Drum in hat design.
- Five studs on 4.50 and 4.75 inch hole circles
Before you buy
A brake rotor works with the pads, calipers and hub, so the rest of the braking system should be checked before a new rotor goes on. Worn pads or a seized caliper slide can cause uneven wear on a new rotor, and a rotor that is installed without a clean, flat hub face can run out and pulse under braking.
Because this rotor is a directional, left-side casting, the side should be confirmed against the old rotor before any parts are ordered. Measuring the old rotor’s diameter, thickness and hub bore gives a practical baseline for comparison. Many owners replace rotors and pads together so that the new friction surface wears evenly from the start.
- Confirm the side and the hub bore match the old rotor
- Check pad condition and caliper slide movement
- Inspect the ABS tone ring and sensor before reassembly
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6919089 |
| UPC | 844165049975 |
| Material | Cast iron |
| Construction | Full cast, one piece |
| Surface type | Plain |
| Outside diameter | 12 in |
| Nominal thickness | 1.02 in |
| Overall height | 2.406 in |
| Center hole diameter | 2.78 in |
| Stud/lug quantity | 5 |
| Stud/lug hole circle diameter | 4.50 in and 4.75 in |
| Rotor type | Vented |
| Brake surface | Directional |
| Axle side | Left |
| Drum in hat | Yes |
| ABS tone ring included | No |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
It is made for select Baer Brake systems. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Fit the rotor to the left side only, since the braking face is directional. Rotors are sold individually, so a rotor for the opposite side is a separate purchase. The ABS tone ring is not included, so plan for that if your brake system uses one. Support the vehicle securely before removing any brake components.
What’s included
One left-side 1-piece replacement rotor, sold as each.
Not included: ABS tone ring.
