Overview
The Baer Brakes 6910919 is a left-side, 13.000 inch slotted replacement brake rotor. It is a two-piece, vented cast iron ring made for certain Baer Pro Plus systems and other Baer brake setups, and it is sold as a single unit.
The rotor uses a curved vane design meant to aid cooling and is dynamically balanced to reduce vibration. Because the part is directional, a left rotor cannot replace a right one. It is made for certain Baer Pro Plus systems and other Baer brake setups, so confirm the application against your own brake system before choosing it.
Key features
- Two-piece ring construction for certain Baer Pro Plus systems
- Curved vane design intended to improve cooling
- Dynamic balancing for smooth, vibration-free running
- Slotted friction surface on a vented cast iron rotor
- Directional rotor built for the left side only
- Performance grade casting made from premium materials
Choosing a slotted rotor
Slotted rotors channel gas and pad debris away from the friction face, which helps keep the pad surface clean under repeated stops. Slots can also wear pads faster in some driving, so pad choice matters. A slotted surface suits drivers who want consistent bite in mixed street and trail use, but it asks for regular inspection of the slot edges.
A two-piece rotor has a separate hat and ring joined by fasteners, so the joint and mounting hardware deserve as much attention as the braking surface. Before fitting, clean the mating faces, use fasteners in good condition, and check that the ring sits flat. Any play or movement at the joint means the assembly should not return to service.
- Inspect the hat and ring joint for looseness or cracks at every service
- Replace damaged mounting fasteners rather than reusing them
- Keep pads matched to a slotted surface to avoid uneven wear
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6910919 |
| UPC | 90127961223 |
| Axle position | Left |
| Construction | Two piece |
| Material | Cast iron |
| Outside diameter | 13.000 inch |
| Nominal thickness | .810 inch |
| Mounting bolt hole circle diameter | 8.50 inch |
| Mounting bolt hole quantity | 12 |
| Rotor type | Vented |
| Surface type | Slotted |
| Brake surface | Directional |
| Grade type | Performance |
| Emission code | 6 |
| ABS tone ring included | No |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
It is made for certain Baer Pro Plus systems and other Baer brake setups. Check fit against your vehicle’s year, model and trim before ordering.
Compare the 13.000 inch diameter, 12 bolt holes on an 8.50 inch circle and .810 inch thickness with your current rotor before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fit this rotor on the left side only, because the brake surface is directional. The right-side rotor is a separate part. Have a qualified technician check the brakes after installation, since rotor condition affects stopping distance.
What’s included
One left-side replacement rotor, sold as a single unit.
Not included: the right-side rotor, which is sold separately.
