Overview
The Baer Brakes 6910120 is a left-side, two-piece replacement brake rotor for select Baer Brake systems. It is a 12.790 inch vented rotor with slotted and drilled friction surfaces and a zinc-plated finish, cast from iron.
The part is directional and built for the left side of the vehicle only, so it does not replace a right-side rotor. Confirm fit for your vehicle’s year, model and trim before ordering, and check the side marking before mounting.
Key features
- Purpose-built cast iron castings
- Curved vane design intended to improve cooling
- Engineered for rotor stability and resistance to distortion
- Dynamically balanced for vibration-free performance
- Directional friction surface for the left side of the vehicle
- Slotted, drilled and zinc-plated surface finish
Installing a left-side rotor
A directional rotor only works correctly on the side it was built for, so the left ring must go on the left hub. Look for the side marking and compare the 12-hole, 7.5-inch bolt circle with the hub before tightening anything. Because rotors are sold individually, plan to source the right-side partner in the same order to avoid mismatched rotors on an axle.
Remove any rust from the hub face and check for debris before mounting. Brake surfaces should be bedded with pads using a series of gradual stops after installation. Recheck wheel fasteners after the first few drives, and have a qualified technician confirm the work if you are unsure.
- Match the side marking to the hub
- Clean the hub face before mounting
- Source the matching right-side rotor separately
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6910120 |
| UPC | 844165011958 |
| Axle side | Left |
| Construction | Two piece |
| Rotor type | Vented |
| Directional or non-directional brake surface | Directional |
| Surface type | Slotted, drilled and zinc plated |
| Material | Cast iron |
| Outside diameter | 12.790 inch |
| Nominal thickness | 1.255 inch |
| Mounting bolt hole quantity | 12 |
| Mounting bolt hole circle diameter | 7.5 inch |
| Grade type | Performance |
| Emission code | 6 |
| ABS tone ring included | No |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
Because the rotor is side-specific, check that the system and side match your vehicle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rotor is directional and side-specific, and rotors are sold individually, so the matching rotor for the opposite side must be obtained separately. The ABS tone ring is not included, so check whether your system uses one. Brake work affects stopping performance, so have the installation checked by a qualified technician.
What’s included
One left-side replacement rotor, part number 6910120, sold as each.
Not included: the right-side rotor, which is sold individually, and an ABS tone ring.
