Overview
The Baer Brakes 6910193 is a left-side, 1-piece tall hat replacement brake rotor for select Baer Brake systems. It is a vented, full cast cast-iron rotor measuring 11.35 inches across, with an overall height of 2.213 inches and a plain surface finish. Its directional design means it is built for the left side of the vehicle only.
The castings are purpose built from premium materials, with a curved vane layout for cooling and dynamic balancing for smooth running. The taller hat makes the overall height the key dimension to check against your existing rotor before installation.
Key features
- Curved vane layout intended for optimum cooling
- Dynamic balanced to reduce vibration
- Built for rotor stability and resistance against distortion
- Purpose built, full cast, one-piece construction
- Vented rotor with a tall hat and plain surface
- Directional, left-side design
Tall hat fitment checks
A tall hat raises the rotor face relative to the hub, which changes how the rotor sits against the caliper and the wheel. Before installing, compare the overall height with the rotor being removed and confirm that the caliper bracket and pads still clear the rotor face. Clearance under the wheel and against the suspension should also be checked.
Hub faces collect rust and debris over time. Clean the mounting surface and remove any corrosion so the rotor seats flat and runs true. Tighten the lug nuts in a star pattern and recheck them after the first few drives, as settling can loosen them slightly.
- Compare overall height with the old rotor
- Check caliper and pad clearance over the hat
- Clean and inspect the hub face before mounting
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6910193 |
| UPC | 844165034629 |
| Axle position | Left |
| Outside diameter | 11.35 inch |
| Nominal thickness | 0.81 inch |
| Overall height | 2.213 inch |
| Hat style | Tall hat |
| Center hole diameter | 2.78 inch |
| Stud/lug hole quantity | 5 |
| Stud/lug hole circle diameter | 4.75 inch |
| Material | Cast iron |
| Construction | Full cast, one piece |
| Rotor type | Vented |
| Brake surface | Directional |
| Surface type | Plain |
| Drum in hat | No |
| ABS tone ring included | No |
| Grade type | Performance |
| Emission code | 6 |
| Country of origin | USA |
| Quantity | Each |
Vehicle fitment
Fitment is tied to select Baer Brake systems rather than to a vehicle year, make or model, so match the rotor to your system’s hat height and bolt pattern.
Confirm your vehicle’s year, model and trim before ordering. Compare the 2.213 inch overall height with your current rotor before fitting.
Installation notes
The rotor is directional and installs on the left side only. Its 5 x 4.75 inch bolt pattern and 2.78 inch center bore are the dimensions to match against your hub before mounting. A qualified technician should handle the brake assembly and torque all fasteners to specification.
What’s included
A single left-side replacement rotor.
Not included: the opposite-side rotor, friction pads, caliper assemblies and hub hardware must be sourced separately.
