Overview
The Baer Brakes 6911094 is a left-side, one-piece replacement brake rotor with an 11.65 in outside diameter and a 0.705 in nominal thickness, sold as each. It is a full cast, vented rotor with a slotted, drilled and zinc-plated surface, used in select Baer Brake systems. Confirm fit for your vehicle before ordering.
This rotor has a 2.78 in center hole, a 2.780 inch register and a drum in hat design. It has two bolt patterns, 4 x 108 mm and 5 x 4.50 in, so measure your hub to confirm which one matches before choosing it.
The castings are made from premium materials. The curved vane design aids cooling, and the rotor is dynamically balanced for smoother running. Its directional surface makes it a side-specific part.
Key features
- One-piece full cast construction
- Drum in hat design listed
- Vented rotor with slotted and drilled surface
- Zinc-plated finish
- Cast iron material with a performance grade
- Directional, left-side brake surface
- Dynamic balance for smoother running
Measuring your hub
Bolt pattern and center bore must match before anything else. Measure from the center of one stud hole to the opposite stud hole on a multi-stud hub, then compare the result with each pattern to see which one applies. A center bore that is too small will not seat, and a larger bore depends on centering rings, which should be checked for fit.
The rotor has a drum in hat design, so the parking brake shoes run inside the hat. Check the shoes, drum surface and adjuster before installing, and clean the hub face so the rotor sits flush. Test braking at low speed after mounting, since a rotor that is not seated square can cause pulsation or runout.
- Measure stud spacing before ordering
- Check centering rings if the bore is oversize
- Inspect parking brake shoes and adjuster
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6911094 |
| UPC | 844165054412 |
| Country of origin | USA |
| Sold as | Each |
| Axle | Left |
| Construction | Full cast, one piece |
| Rotor type | Vented |
| Brake surface | Directional |
| Drum in hat | Yes |
| Surface type | Slotted, drilled and zinc plated |
| Material | Cast iron |
| Grade type | Performance |
| Outside diameter | 11.65 in |
| Nominal thickness | 0.705 in |
| Center hole diameter | 2.78 in |
| Bolt patterns | 4 x 108 mm and 5 x 4.50 in |
| Emission code | 6 |
| ABS tone ring included | No |
Vehicle fitment
Compare the 11.65 in outside diameter, 2.78 in center hole and both bolt patterns with your hub, and confirm the left-side position matches before choosing this rotor.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Two bolt patterns are listed, so measure your hub’s pattern first, since the 4 x 108 mm and 5 x 4.50 in patterns are not interchangeable. Fit the directional rotor on the left side only. Brake parts are safety-critical, so test braking at low speed before regular use.
What’s included
One left-side, one-piece replacement rotor, sold individually.
Not included: An ABS tone ring, which the specifications list as not included.
