Overview
The Baer Brakes 6919167 is a left tall hat replacement brake rotor in 1-piece form, with slotted, drilled and zinc-plated faces. Baer Brakes names certain Baer Track4, SS4 and other Baer Brake systems as its applications, which are system names rather than vehicles.
Its full cast iron body is vented and uses a curved vane design for cooling. The rotor is 13 in outside diameter, 1.1 in nominal thickness and 2.232 in overall height, with a 5-stud pattern on a 5.00 in stud circle and a 3.089 in center hole. The directional face is made for the left side only, and the tall hat height is the main dimension to check against the hub it replaces.
Key features
- Tall hat design with 2.232 in overall height
- Slotted, drilled and zinc-plated surface
- Curved vane design for cooling
- Full cast, 1-piece cast iron construction
- Dynamically balanced for smooth running
- Purpose built castings made from premium materials
- Designed for rotor stability and resistance to distortion.
- Directional design built for the left side of the vehicle
Tall hat clearance
A tall hat rotor sits further out from the hub face, which changes how the caliper, wheel and any spacer sit around the rotor. Before fitting, check that the caliper bracket clears the rotor hat and that the wheel has room behind the spokes. Confirm the wheel offset is still suitable with the new rotor in place.
Clean the hub face and remove any rust ring left by the old rotor, because a dirty mounting face can cause runout and vibration. Use fresh hardware where the old bolts are worn, and tighten to the torque your service manual specifies. Recheck the lug nuts after the first drives, and inspect the rotor for cracks or scoring whenever the wheel is removed.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6919167 |
| UPC | 844165054504 |
| Axle side | Left |
| Hat style | Tall hat |
| Outside diameter | 13 in |
| Nominal thickness | 1.1 in |
| Overall height | 2.232 in |
| Center hole diameter | 3.089 in |
| Stud/lug hole circle diameter | 5.00 in |
| Stud/lug quantity | 5 |
| Material | Cast iron |
| Construction | Full cast, 1 piece |
| Rotor type | Vented |
| Brake surface | Directional |
| Surface type | Slotted, drilled and zinc plated |
| Grade type | Performance |
| ABS tone ring included | No |
| Drum in hat | No |
| Emission code | 6 |
| Package | Each |
| Country of origin | USA |
Vehicle fitment
It is made for certain Baer Track4, SS4 and other Baer Brake systems, which are system names rather than vehicles. Match the rotor to that system before fitting.
No vehicle is confirmed for this rotor. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the left side before fitting, since the rotor is directional. The 2.232 in overall height and 3.089 in center hole should be checked against your hub and system before installation. No ABS tone ring is included with this part.
What’s included
A tall hat left replacement rotor, packaged as each.
Not included: ABS tone ring. Brake pads and calipers are separate parts and are not part of this part number.
