Overview
The Baer Brakes 4262197B is a black rear Pro Plus disc brake system for Ford 9 inch rear ends that use Torino (late big) bearing housing ends. Its six-piston fixed caliper squeezes a 14 inch two-piece rotor, and the backing plate, which houses a one-piece park brake shoe assembly, mounts the caliper.
Baer positions the 14 inch Pro Plus toward drivers with wheels 18 inch or larger. Use template Q082P to compare the brake system with the wheel you intend to run, since Baer does not guarantee fit across all wheel styles.
Key features
- Black six-piston fixed caliper with a 6P design
- Staggered pistons designed to limit uneven pad wear
- Dual seals for dust, weather and pressure
- Two-piece zinc-plated rotor, slotted and drilled, on a billet aluminum hat
- Integrated one-piece park brake shoe inside the backing plate
- Pistons and abutments are stainless steel, with noise suppression clips
- Manufactured in Phoenix, Az with CNC machined aluminum parts and a powder coated finish
Brake fluid and bleeding
Any rear brake job that opens the hydraulic system needs a proper bleed. Air trapped near the caliper makes the pedal feel soft and reduces stopping force, so bleed the lines in the sequence the vehicle manual calls for. Use fresh fluid from a sealed container, since old fluid absorbs moisture and can boil under hard braking.
Black calipers show dust and heat marks more clearly than lighter finishes, which helps with inspection. Look for fluid around the piston and dust boot, uneven pad wear and rotor surface heat marks. Early signs of trouble are easier to catch when the wheels are off for pad work.
- Bleed the system after any hose or caliper change
- Use fresh brake fluid from a sealed container
- Inspect the dust boot for cracks at each pad change
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262197B |
| UPC | 844165037187 |
| Caliper | 6-piston (6P), fixed, black |
| Pad type (FMSI) | D0731 |
| Rotor type | 2-piece, slotted, drilled, zinc-plated |
| Rotor material | Iron with aluminum hat |
| Rotor construction | Vented |
| Rotor outside diameter | 14.0 inch |
| Rotor thickness | 1.15 |
| Minimum wheel diameter | 18.0 inch |
| Wheel bolt pattern | 5 lug, 5×5.00 inch |
| Axle flange | Ford 9 inch Torino/late big bearing |
| Template | Q082P |
| Hose material | Steel braided, DOT approved |
| Park brake | Included (one-piece shoe assembly in backing plate) |
| Park brake cables | Not included |
| Grade | Performance |
| Country of origin | US |
Vehicle fitment
It fits rear Ford 9 inch axles with Torino (late big) bearing housing ends and a 5×5.00 inch bolt pattern, with an 18.0 inch minimum wheel diameter. Confirm fit for your vehicle’s year, model and trim before ordering.
Fitment rests on the axle flange and bolt pattern rather than a named model, so confirm both against your axle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The park brake cables are not supplied, so the integrated park brake will need a separate cable set. The rotor is pre-assembled with stainless hardware and the hoses are included. Keep the Q082P template handy when you check wheel clearance.
What’s included
The package covers the black caliper, a pre-assembled rotor with stainless fasteners, the backing plate and park brake shoe, plus braided steel hoses.
Not included: park brake cables, lug nuts and the front rotor.















