Overview
The Baer Brakes Pro Plus 4262189B is a rear brake kit with a 14-inch two-piece slotted and drilled rotor and a black six-piston fixed caliper, built for Ford 9 inch early big bearing rear axle housing ends with a 5×5.00 bolt pattern. Baer’s template Q082P is the reference for checking wheel clearance before fitting.
Baer’s backing plate acts as the caliper mount and also houses a one-piece park brake shoe assembly, so the parking brake function sits inside the rear kit. Rotors come pre-assembled with NAS high grade stainless hardware, stainless braided hoses are included, and the pads are the D0731 type.
Key features
- Six-piston 6P fixed caliper in black with staggered pistons to reduce uneven pad wear
- Stainless steel pistons, abutments and noise suppression clips
- Two-piece slotted, drilled, zinc-plated rotor with a billet aluminum hat
- Dual seals for dust, weather and pressure
- Backing plate doubles as the caliper mount and houses the park brake shoe assembly
- Stainless braided hoses, DOT approved
- CNC machined from US-sourced forged or billet aluminum with a powder coated finish
- Manufactured in Phoenix, Arizona
Choosing rear brake upgrades
A rear disc kit changes more than stopping power. The rotor, caliper and backing plate work together with the axle, hubs and wheel offset, so the parts should be matched as a set. Wheel clearance around a larger rotor is often the first thing to check, since a rotor that sits close to the inside of the wheel can rub or limit the choice of wheel style.
Park brake function deserves attention in any rear kit. When the shoe assembly sits inside the backing plate, the cable connection becomes a separate task, and the old cables and adjusters should be inspected at the same time. Cables that stick, stretch or fail to hold the vehicle on a grade are commonly replaced during a rear brake upgrade.
- Measure wheel clearance before buying the rotor
- Inspect the park brake cables and adjuster during installation
- Replace worn hubs or bearings if the rotor face shows runout
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262189B |
| UPC | 844165037040 |
| Template | Q082P |
| Caliper | 6-piston (6P), fixed, black |
| Pad type | FMSI D0731 |
| Rotor type | 2-piece, vented |
| Rotor outside diameter | 14.0 inch |
| Rotor thickness | 1.15 |
| Rotor material | Iron with aluminum hat |
| Rotor surface | Slotted, drilled and zinc plated |
| Minimum wheel diameter | 18.0 inch |
| Lug count and bolt pattern | 5 lug, 5×5.00 inch |
| Axle flange | Ford 9 inch early big bearing |
| Hose material | Steel braided, DOT approved |
| Grade | Performance |
| Country of origin | US |
Vehicle fitment
It fits the Ford 9 inch early big bearing rear axle flange with a 5×5.00 bolt pattern. Confirm fit for your vehicle’s year, model and trim before ordering.
The flange is the early big bearing style only, and fit with every wheel style is not guaranteed. Compare template Q082P with your wheel before mounting.
Installation notes
The 14-inch rotor is sized for wheels 18 inch or larger, so compare template Q082P with your wheel before mounting. Rotors arrive pre-assembled with stainless hardware, and the park brake shoe assembly sits inside the backing plate, so the cable connection is a separate step to plan for.
What’s included
- Six-piston caliper and backing plate with park brake shoe assembly
- Two-piece rotor pre-assembled with NAS high grade stainless hardware
- Stainless braided hoses and hardware
Not included: the kit omits park brake cables and lug nuts, and the front rotor is not part of the kit.















