Overview
The Baer Brakes 4011003B-2 is a front 6T brake kit for the 2022–2025 Toyota Tundra, supplied with a Black caliper finish. Its six-piston, direct-mount caliper clamps a 1-piece slotted, zinc-plated vented rotor and runs the D1247 pad, so Tundra drivers on 17-inch or larger wheels get a bigger front brake setup.
Everything needed for the front axle comes as one kit. Mounting brackets, braided stainless hoses and hardware are supplied, which saves sourcing the parts one at a time. Baer machines its calipers from US-sourced forged or billet aluminum, and the rotor’s curved vane layout is meant to keep braking consistent and fade low during repeated stops. Dual seals guard against dust and weather, and staggered pistons are intended to limit uneven pad wear.
Key features
- Fixed direct-mount 6T caliper with six pistons, finished in Black.
- Powder coated caliper body.
- Stainless steel pistons, abutments and noise suppression clips.
- Staggered piston layout intended to reduce uneven pad wear.
- Dual seals against dust, weather and pressure.
- 1-piece slotted and zinc-plated vented rotor.
- Braided stainless hoses and mounting hardware included, with hoses sized for stock-height trucks.
- Manufactured in Phoenix, AZ, from US-sourced forged or billet aluminum.
On the trail
Off-road driving puts brakes under different stress than pavement driving. Long descents, low speeds and repeated stops heat the rotor and pads for longer periods, so pad material and rotor design matter more. A slotted rotor helps clear debris and gases from the pad face, but it can also wear pads faster if the pad is not designed for it. Choose pads that suit the terrain you drive most.
Mud and water can reach the caliper and hose on trail runs. Inspect the braided hose for chafing and check the caliper seals after deep water crossings. Keep the rotor surface clean and watch for grooves or heat marks, which show the old part is worn.
- Check hoses for chafing after trail use
- Inspect the rotor for grooves or heat marks
- Match pad choice to the terrain
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4011003B-2 |
| UPC | 90127970164 |
| Sold as | Kit |
| Caliper | 6T, fixed, direct mount, 6 pistons |
| Caliper color | Black |
| Caliper material | CNC machined forged or billet aluminum |
| Piston material | Stainless steel |
| Rotor type | 1-piece, vented, slotted and zinc plated |
| Rotor outside diameter | 13.586 inch |
| Rotor thickness | 1.18 inch |
| Pad FMSI number | D1247 |
| Friction material | Semi-metallic |
| Hose material | Steel braided, DOT approved |
| Lug count | 6 |
| Wheel bolt pattern | 6×5.50 inch |
| Minimum wheel diameter | 17.0 inch |
| Template | O185M |
| Grade | Performance |
| Country of origin | USA |
Vehicle fitment
It fits the 2022–2025 Toyota Tundra front axle. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The hoses supplied suit stock-height Tundras, so trucks with a lift should plan for hose lengths beyond those supplied. Baer recommends comparing wheel clearance against its O185M template before choosing a wheel, since the brand cannot promise fit with every wheel style. Plan on wheels of 17 inch or larger.
What’s included
The Black 6T front caliper, the 1-piece slotted and zinc-plated rotor, mounting brackets, stainless braided hoses and hardware. The kit is sold as a kit.
















