Overview
The Baer Brakes 4262685C is a clear SS4 Plus deep stage rear brake kit for GM small pattern 10/12 bolt bearing-on-axle housing ends, aimed at drag racing and at heavier, faster cars that are also driven on the street. Four S4 calipers with 1.375 inch pistons clamp 11.0 inch two-piece rotors.
Apart from the caliper color, the specifications match the Fire Red version of this kit. Baer builds the system in Phoenix, Az. Confirm the axle flange type and the required 5.75 inch flange before you narrow down your options.
Key features
- Four-piston S4 calipers with a clear powder coat finish
- Hard anodized aluminum pistons seated against stainless steel abutments
- Noise suppression clips included with the friction setup
- Vented 11.0 inch rotors, slotted, drilled and zinc plated
- Billet aluminum hats drilled for 5/8 inch wheel studs
- High friction pads come standard for drag race use
- Dust and weather seals; DR1 or HB100 pad type
Caring for clear calipers
Clear powder coat shows brake dust, road grime and heat discoloration more clearly than a colored finish, so the calipers benefit from regular wipe-downs. Use a mild, non-abrasive cleaner and a soft cloth. Harsh solvents and wire brushes can dull or chip the coating, which exposes the metal underneath.
Finish has no effect on how the pistons, pads and rotors work. What matters for braking is the pad compound, the rotor surface and the condition of the hoses. Inspect the caliper body after hard runs for cracks, leaks at the bleeder and any signs the coating has lifted near the mounting bolts.
- Wipe calipers after each track or street session
- Avoid abrasive pads on the coated surfaces
- Check bleeder screws for seepage after bleeding
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262685C |
| UPC | 844165049098 |
| Caliper | S4, 4-piston fixed type, four calipers |
| Caliper color | Clear |
| Piston size | 1.375 inch |
| Rotor outside diameter | 11.0 inch |
| Rotor type | Two-piece, vented, slotted and drilled, zinc plated |
| Rotor material | Iron with aluminum hat |
| Rotor thickness | 1.02 |
| Pad type | DR1 or HB100 |
| Pad FMSI number | DR1 |
| Friction material | Semi-metallic |
| Minimum wheel diameter | 15.0 inch |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Axle flange | GM small pattern 10/12 bolt bearing on axle, non-flush mount |
| Bearing | 3.150 inch |
| Hardware | NAS high grade stainless, pre-assembled with rotors |
| Park brake included | No |
| Front rotor included | No |
| Lug nuts included | No |
| Grade | Performance |
| Template | S125A |
| Emission code | 6 |
| Country of origin | US |
Vehicle fitment
It is built for GM small pattern 10/12 bolt bearing on axle flanges measuring 5.75 inch, with wheels 15 inch or larger.
Measure the axle housing and flange before ordering, and confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rotors come pre-assembled with stainless hardware, and mounting hardware is included. Brake hoses are not included, so sort out line length and fittings for the clear calipers before the install. Bed in the pads and bleed the system fully before using the brakes at speed.
What’s included
Four clear S4 calipers, two-piece rotors with NAS stainless hardware, mounting hardware and high friction drag race pads.
Not included: brake hoses, a park brake, a front rotor and lug nuts.















