Overview
Baer Brakes part 4262094B is a black Extreme Plus rear brake kit made for Ford 8 Inch/9 Inch rear ends with small bearing flanges and five lugs on a 5×5.00 bolt pattern. The kit centers on a 1-piece monoblock 6-piston caliper, here in black, working on a 14.0 inch vented 2-piece rotor. It is a Performance grade kit with an integrated park brake.
In this design the backing plate both mounts the caliper and carries the park brake shoe assembly, which Baer describes as a modern 1-piece unit. Stainless braided hoses come with the kit, and the rotor arrives with stainless hardware already fitted. Park brake cables are not supplied. Because wheel designs differ, Baer advises checking the N085P template against the wheel you plan to run.
Key features
- Black caliper color on a 1-piece monoblock 6S caliper
- Six pistons in a staggered layout to limit uneven pad wear
- Stainless steel pistons, abutments and noise suppression clips
- Caliper body CNC machined from US-sourced 2618 aluminum forging
- Dual dust, weather and pressure seals
- Zinc-plated, slotted and drilled 2-piece rotor with billet aluminum hat
- Integrated 1-piece park brake shoe assembly
- D1247 pad type with a 14.0 inch rotor outside diameter
Park brake service
The integrated park brake shoe sits inside the backing plate, so it is out of sight once the kit is installed. Because it works alongside the caliper, it deserves a look whenever the rear brakes are opened up. Shoe lining that has worn down unevenly can cause the park brake to hold poorly, even when the hydraulic brakes feel normal.
Cables are the other half of the park brake. Stretched or corroded cables reduce holding force and can cause one side to drag. Replacing them during the install is a practical step, since the cables are not supplied with the kit and access is easiest while the axle is apart.
- Inspect shoe lining during each rear service
- Replace stretched or corroded cables
- Test hold on a slope after installation
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262094B |
| UPC | 844165035848 |
| Sold as | Kit |
| Axle flange | Ford 8 Inch/9 Inch Small Bearing |
| Wheel bolt pattern | 5×5.00, 5 lug |
| Minimum wheel diameter | 18.0 inch |
| Caliper | 1-piece monoblock, 6-piston, 6S |
| Caliper color | Black |
| Caliper material | CNC machined from US-sourced 2618 aluminum forging |
| Pad type | D1247 (FMSI) |
| Rotor outside diameter | 14.0 inch |
| Rotor construction | 2-piece, vented |
| Rotor thickness | 1.25 |
| Rotor material | Iron with aluminum hat |
| Rotor surface | Slotted, drilled and zinc plated |
| Hose material | Stainless steel |
| Park brake | Included; cables not included |
| Grade | Performance |
| Template | N085P |
| Country of origin | US |
Vehicle fitment
The kit is made for Ford 8 Inch/9 Inch small bearing rear axles with a 5×5.00 bolt pattern. An axle name alone does not pin down a single vehicle, so match your rear end to these measurements before choosing this kit.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a rear axle kit: the backing plate, caliper and park brake shoe assembly come as one unit. Park brake cables and lug nuts must be sourced separately. Confirm the 18.0 inch minimum wheel diameter and run the N085P template against your wheel. A qualified brake technician should handle the park brake and hydraulic connections.
What’s included
A black 6-piston 6S monoblock caliper, 14.0 inch 2-piece rotors with pre-assembled stainless hardware, an integrated park brake shoe assembly, and stainless braided hoses and hardware.
Not included: Park brake cables, lug nuts and front rotor.















