Overview
The Baer Brakes 4301389S is a silver Pro Plus front brake system for 1960–1986 Chevrolet C10 and GMC C15 2WD half-ton trucks with CPP 2.5 inch drop spindles and a 6 lug, 6×5.50 inch wheel pattern. It is built around a six-piston 6P caliper and a 14 inch two-piece rotor.
The Pro Plus rotor is slotted, drilled and zinc plated, with a billet aluminum hat. Brackets, braided hoses and hardware are included, and the billet hubs come with premium bearings packed in Redline synthetic grease. The silver caliper finish is the difference between the 4301389S and the red 4301389R or black 4301389B versions.
Key features
- Six-piston 6P caliper, fixed type, manufactured in Phoenix, Arizona
- Caliper machined from forged or billet aluminum and powder coated
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons to help minimize uneven pad wear
- Dual seals for dust, weather and pressure
- Two-piece rotor, slotted, drilled and zinc plated, with billet aluminum hat, pre-assembled with stainless hardware
- Brake hoses are DOT approved.
- D0731 pad type
Six-lug hub and wheel fit
Six-lug wheel patterns depend on the hub, the spindle and the wheel working together. Before mounting a wheel, confirm the stud count, the bolt circle and the seat type match the wheel’s center bore and lug nut style. Wheel offset also changes how the wheel sits against the caliper, so a wheel that clears the rotor when parked should still be spun and inspected for rub on the caliper body at full steering lock.
Six-lug trucks from this era often have worn wheel studs or stretched lug holes from years of hard use. Replacing studs when the threads show damage costs less than chasing a loose wheel later. Lug nuts should be tightened in a star pattern and checked again after the first few drives. Because the Pro Plus rotor is a two-piece unit with a billet hat, keep the hat faces clean and free of rust where the wheel seats.
- Check stud threads and replace any that are damaged
- Tighten lug nuts in a star pattern
- Spin and inspect wheels for caliper rub
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4301389S |
| UPC | 844165040873 |
| Sold as | Kit |
| Caliper | 6P, six-piston, fixed |
| Caliper color | Silver |
| Rotor outside diameter | 14.0 inch |
| Rotor thickness | 1.15 inch |
| Rotor construction | Two-piece, iron rotor with aluminum hat |
| Rotor style | Slotted, drilled, zinc plated, vented |
| Brake pad FMSI number | D0731 |
| Brake hose | DOT approved |
| Lug count | 6 lug |
| Wheel bolt pattern | 6×5.50 inch |
| Wheel stud size | 1/2-20 x 2.25 inch |
| Minimum wheel diameter | 18.0 inch |
| Template | Q117P |
| Drive and axle | 2WD, front |
| Country of origin | US |
Vehicle fitment
The 4301389S fits these Chevrolet and GMC trucks: 1960–1986 Chevrolet C10; 1967–1986 Chevrolet C10 Suburban; 1960–1966 and 1987–1989 Chevrolet Suburban; 1966 GMC 1000; 1960–1965 GMC 1000 Series; 1975–1978 GMC C15; 1967–1974 GMC C15/C1500; and 1979–1986 GMC C1500.
The application is for 2WD trucks, so four-wheel-drive configurations are not covered. Later C10 and C1500 models are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The Pro Plus bolts to CPP 2.5 inch drop spindles that are not supplied, so the spindle must be in place before the hubs are fitted. The Q117P template is for this 6 lug system and should be used to check wheel clearance. Brake work is safety-critical, so have a qualified technician verify the finished assembly before driving.
What’s included
Included are the two-piece 14 inch rotors, six-piston calipers, billet aluminum hubs with bearings, mounting brackets, braided hoses and hardware. The rotors arrive pre-assembled with stainless hardware, and the front rotor is included.
Not included: CPP 2.5 inch drop spindles and lug nuts.














