Overview
The Baer Brakes SS4 Plus 13.0 inch rear brake system, part number 4262262S, is a rear disc brake kit for Ford 9 inch rear axles with early Big Bearing housing ends and a 5×5.00 wheel bolt pattern. A four-piston S4 caliper clamps a vented, two-piece slotted and drilled rotor, and Baer’s backing plate holds both the caliper mount and a one-piece park brake shoe assembly.
The silver finish version targets owners who need a Big Bearing rear upgrade with a parking brake built in. Baer rates the system for wheels 17 inch or larger. Because the kit is axle-based and no vehicle is named for this part number, confirm your axle flange and bolt pattern before buying.
Key features
- S4 four-piston caliper made in Phoenix, Az, machined from US sourced forged or billet aluminum
- Silver powder coated caliper finish
- Pistons are hard anodized aluminum, seated against stainless steel abutments with noise suppression clips
- Dual seals for dust, weather and pressure
- Two-piece slotted, drilled, zinc-plated rotor with a billet aluminum hat and NAS high grade stainless hardware
- Backing plate doubles as the caliper mount and carries the park brake shoe assembly
Park brake and wear checks
On a rear disc kit with an integrated park brake, the shoe assembly works in the same space as the service brake. Over time the lining wears, and the parking function can weaken before the service brake shows any change. Periodic checks of the cable path and shoe adjustment help catch that early.
Rotors and pads wear at different rates depending on driving. Frequent towing, steep grades and hard stops generate more heat and speed up wear. Look for pulsation, grinding, or a pedal that feels lower than it used to. Any of these means the system needs inspection before further use.
- Inspect the rotor surface for scoring or heat cracks
- Check hydraulic lines and fittings for leaks
- Torque lug nuts to the vehicle’s specification after installation
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262262S |
| UPC | 844165028475 |
| Caliper | S4, four-piston, fixed |
| Caliper color | Silver |
| Rotor type | Two-piece, slotted, drilled, zinc plated |
| Rotor design | Vented |
| Rotor outside diameter | 13.0 inch |
| Rotor thickness | 0.81 |
| Rotor material | Iron with aluminum hat |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×5.00 |
| Minimum wheel diameter | 17.0 inch |
| Axle flange | Ford 9 inch early Big Bearing |
| Pad type | DR1-C |
| Template | S135H |
| Park brake | Included; park brake cables not included |
| Grade type | Performance |
| Emission code | 6 |
| Sold as | Kit |
| Country of origin | US |
Vehicle fitment
The kit is built for Ford 9 inch rear axles with early Big Bearing housing ends and a 5×5.00 wheel bolt pattern. Wheel fit varies by style, so check your wheel against the S135H template before mounting.
Measure your axle flange and bolt pattern, then check fit against your vehicle’s year, model and trim before buying.
Installation notes
Park brake cables are not supplied, so plan to source them for the parking function. The rotor and hardware come pre-assembled, and the wheel clearance check Baer recommends uses its S135H template. Lug nuts are not included. Brake installation is safety critical, so use a qualified shop for setup and bleeding.
What’s included
Pre-assembled two-piece rotor with stainless hardware, S4 four-piston caliper, backing plate with one-piece park brake shoe assembly, and braided hoses with hardware.
Not included: park brake cables, lug nuts and front rotor.















