Overview
The Baer Brakes 4301355S is a Pro Plus front brake system with 13-inch rotors for the 1991 GMC Syclone and 1992–1993 GMC Typhoon. Its silver six-piston calipers work with a slotted and drilled two-piece rotor that Baer pairs with a billet aluminum hat.
Each hub is built up in its own shop before dispatch, with bearings and races pressed in and filled with Redline synthetic grease. The assembly is fitted to the truck’s control arms as a single unit, which suits owners of these two GM trucks looking for a silver front brake upgrade.
Key features
- Two-piece 6P caliper with six pistons, made in Phoenix, Arizona
- CNC machined caliper body from US sourced forged or billet aluminum
- Silver powder coat finish
- Stainless steel pistons, abutments and noise suppression clips
- Pistons staggered so the pads wear more evenly
- Dual seal design protects against dust, weather and pressure
- Two-piece rotor, slotted, drilled and zinc-plated, with billet aluminum hat
Choosing the right setup
A 13-inch front kit changes the way the brakes respond, so think about the whole front end before ordering. Rotor size, caliper travel and pad compound all influence pedal feel. Keep the brake fluid fresh and the hoses in good shape, since heat and pressure are the usual points of failure in a front brake upgrade.
Silver calipers are a finish choice only as far as this part goes. When comparing kits, match the bolt pattern and wheel clearance first. Pads and rotors wear at different rates, so inspect them together and replace them as a set when one is due.
- Match pads to the type of driving
- Inspect hoses for swelling or cracks
- Replace rotors and pads together when worn
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4301355S |
| UPC | 844165046462 |
| Sold as | Kit |
| Axle | Front |
| Caliper | 6P, six-piston |
| Caliper color | Silver |
| Rotor diameter | 13 inch |
| Rotor style | Slotted, drilled |
| Rotor construction | 2-piece |
| Rotor material | Iron with aluminum hat |
| Rotor surface | SDZ |
| Min wheel diameter | 17.0 inch |
| Wheel bolt pattern | 5×4.50/5×4.75 in |
| Template | Q082H |
| Front rotor included | Yes |
| Lug nuts included | No |
| Box count | 1 |
| Emission code | 6 |
| Country of origin | US |
Vehicle fitment
The 4301355S fits the 1991 GMC Syclone and the 1992–1993 GMC Typhoon, both at the front axle.
Compare your wheel against template Q082H before mounting, since fit depends on wheel design. Trucks and years outside these two listings are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bearings and races come installed in the hubs, so the job is primarily bolting the assembly to the control arms. Lug nuts are not part of the kit and must be sourced separately. Because the minimum wheel diameter is 17.0 inch, check wheel clearance against the template first. Brake work on a caliper system like this is best handled by someone experienced with hub and caliper installation.
What’s included
The kit is sold in one box and includes the front rotor along with the Pro Plus front brake components described above.
Not included: Lug nuts.













